4.5T Ridge Cap Roll Forming Machine With Mold Steel Cr12 Post Cutter，Sheet Roll Forming Machine

Product Description                                                                                                                                                                                                                     

          YX112-300 Ridge Cap Roll Forming Machine

1. Main features of YX112-300 Ridge Cap machine

1. Widely used in many kinds of industrial factory, civilian buildings
2. pretty appearance, durable using
3. Instead of using a bending machine to make angel tile
4. saving human resources, lower labor cost.

    Machine Parts

        1) YX100-330 Ridge cap machine manual pre-cutter

        Brand: BMS    Original: China

        2) YX112-300 Ridge Cap roll forming machine rollers 

        Brand: BMS    Original: China

        Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.

        with Hard-Chrome Coating for long working life

        With feeding material guide, body frame made from 350# H type steel by welding

       3) YX112-300 Ridge Cap roll forming machine post cutter 

        Brand: BMS    Original: China

        Made by high-quality mold steel Cr12 with heat treatment

        Cutter frame made from high quality 20mm steel plate by welding
        Hydraulic motor:2.2KW, Hydraulic pressure range: 0-16Mpa

        4) YX112-300 Ridge Cap roll forming machine punching mold

        Brand: BMS    Original: China

        5) YX112-300 Ridge Cap roll forming machine decoiler 

        Brand: BMS    Original: China

        Manual Decoiler: one set

        Un-powered, manually control steel coil inner bore shrinkage and stop

        Max. feeding width: 1250mm, coil ID range 470mm±30mm

        Capacity: Max. 5 Ton   

     With 6 tons hydraulic decoiler(with coil car or without the car) for option 

Other detailes of YX100-330 Ridge Cap Roll Forming Machine

Suitable for material with thickness 0.4-0.6mm

Shafts manufactured from 45#, Main shaft diameter=φ70mm, precision machined

Motor driving, Gear chain transmission, 14 steps to form

Main motor=5.5KW, Frequency speed control. Forming speed of approx.12-15m/min

PLC Control System (Touch screen brand: France Schneider Electric/Taiwan WEINVIEW,

Inverter brand: France Schneider Electric/Taiwan DELTA/SHILIN, Encoder brand: Japan brand Koyo/OMRON)

Combined with: PLC, Inverter, TouchScreen, Encoder, etc

Cut-to-lengthtolerance≤±2 mm

Control Voltage 24V

User's manual in English