Blast Wheel Tilt Drum Shot Blasting Equipment For Casting Forging Parts Cleaning

High Efficiency Blast Wheel Tilt Drum Shot Blasting Machine For Casting Forging Parts Cleaning

Tilt drum shot blasting machine

The inclined drum shot blasting machine is one of the standard series of cleaning equipment newly developed by our company. This machine can be used to clean the workpieces that are easy to flip and fall, the non-brittle parts that are not easy to break, and the casting, forging and welding parts with not deep cores, and to remove sand and oxide scale on the surface of the workpiece. The whole machine is controlled by Siemens PLC, which has a high degree of automation. It can be used as a stand-alone machine or by wiring.

1 The shot blasting machine and the motor adopt the German THYSSENKRUPP ThyssenKrupp technology. Compared with the old-fashioned shot blasting machine, the friction loss is reduced. Not only the motor efficiency is greatly improved by 20%, the failure points are also fewer, and the maintenance cost is reduced by 50%. .
2 Compared with the old shot blasting machine, the volume is smaller, the angle can be arranged at will, and the maintenance is more convenient.
3 Compared with the old-fashioned shot blasting machine, the shot blasting effect is constant, and the cleaning quality will not fluctuate.
4 The blades and wear parts are made of high chromium investment casting Cr27, which has high wear resistance, and the service life is about 800-4000 hours, which is 3 times that of ordinary casting materials;
5 Shot blaster impeller: The impeller is carburized with wear-resistant alloy. The impeller body is processed at one time by a high-precision CNC machining center with high precision, ensuring the balance of high-speed operation, low vibration, low noise, and long life;
6 The bearing adopts the products of Sweden SKF;
7 The motor adopts Siemens products;
8 The Schenck dynamic balance instrument is used to ensure the high-speed dynamic balance of the impeller body;