ZhongHong bearing Co., LTD. |
Verified Suppliers
|
|
Professional production CHROME STEEL 30311 30311RS 30311C2 55*120*31.5mm TAPPER ROLLER BEARING
Product introduction
30311 ability of single row tapered roller bearing to bear axial load
depends on the contact angle, that is,the outer ring raceway angle,
the larger the angle, the greater the axial load capacity. Tapered
roller bearings are mainly used to bear radial load mainly radial
and axial combined load. Compared with the angular contact ball
bearing,
Application of Inch tapered roller bearing:
Inch tapered roller bearings are widely used in automotive, rolling
mills, mining, metallurgical,
plastic machinery, etc.
Bore diameter | 55 mm |
Outside diameter | 120 mm |
Width, total | 31.5 mm |
Width, inner ring | 29 mm |
Width, outer ring | 25 mm |
Contact angle | 12.953 ° |
d | 55 mm | Bore diameter |
---|---|---|
D | 120 mm | Outside diameter |
T | 31.5 mm | Total width |
d1 | ≈84 mm | Shoulder diameter of inner ring |
B | 29 mm | Width of inner ring |
C | 25 mm | Width of outer ring |
r1,2 | min.2.5 mm | Chamfer dimension of inner ring |
r3,4 | min.2 mm | Chamfer dimension of outer ring |
a | 23.986 mm | Distance side face to pressure point |
da | max.72 mm | Diameter of shaft abutment |
---|---|---|
db | min.66.5 mm | Diameter of shaft abutment |
Da | min.104 mm | Diameter of housing abutment |
Da | max.110.5 mm | Diameter of housing abutment |
Db | min.111 mm | Diameter of housing abutment |
Ca | min.4 mm | Minimum width of space required in housing on large side face |
Cb | min.6.5 mm | Minimum width of space required in housing on small side face |
ra | max.2.5 mm | Radius of shaft fillet |
rb | max.2 mm | Radius of housing fillet |
Basic dynamic load rating | C | 176 kN |
---|---|---|
Basic static load rating | C0 | 163 kN |
Fatigue load limit | Pu | 19.3 kN |
Reference speed | 4 800 r/min | |
Limiting speed | 5 600 r/min | |
Limiting value | e | 0.35 |
Calculation factor | Y | 1.7 |
Calculation factor | Y0 | 0.9 |
da | max.72 mm | Diameter of shaft abutment |
---|---|---|
db | min.66.5 mm | Diameter of shaft abutment |
Da | min.104 mm | Diameter of housing abutment |
Da | max.110.5 mm | Diameter of housing abutment |
Db | min.111 mm | Diameter of housing abutment |
Ca | min.4 mm | Minimum width of space required in housing on large side face |
Cb | min.6.5 mm | Minimum width of space required in housing on small side face |
ra | max.2.5 mm | Radius of shaft fillet |
rb | max.2 mm | Radius of housing |
30311 Collection
NUP2212 | 30312D | MAG150 | 6213 | HMGF36 |
I84M5X130 | 30314D | NUP309 | 30312D=155 | NUP206=100 |
M5X180 | 30312D | NUP308 | M2X120 | NUP2208 |
32205 | 30309D | GM35VL | 32207 | NUP2211 |
T7FC060 | NUP2207=140 | NUP2206=130 | NUP205E | HMGC48 |
M2X150 | 30312D | 6008 | NUP207=120 | NUP309 |
M2X170 | NUP2209 | NUP307 | NUP2209=160 | 30312D |
M2X210 | JMF23 | 30210 | 6305 | GM35VA |
HMGF57 | JMF151 | 30311D | NUP2211=250 | 30312D=155 |
NUP306 | 11749/11710 | 30210 | KMF160-PC360-7 | SG04 |
NUP307 | NUP309=180 | KMF125-PC200-8 | MSG-27P | SG025 |
KMF41-PC60 | NUP309 | M2X96 | NUP207 | HMGC32 |
NUP308 | NUP206 | MCB172 | HMS072 | HMGF35 |
JMF29 | 6305M | NUP206E | AP5S67 | M2X63 |
NUP307 | 4T-30307 | M2X55 | NUP308=140 | NUP2208=210 |
30312D | SG08 | NUP307 | T7FC055=300 | NUP307=110 |
NIP2310 | GM17VA | NUP307 | NUP309 | JMF195 |
NUP208E | JMV-44/22 | NUP309=180 | JMF250 | NUP2212 |
NUP308=14 | KMF125-PC200-7 | JMV-53/31 | 15578 | |
T7FC065 | NUP2310 | NUP310 | MAG85 | NUP306 |
30309D=110 | 30309D | KMF90-PC200-6 | 30312 | NUP308 |
NUP207/NUP306 | NUP2211 | NUP2206 | NUP207 |
FAQ:
Q1: I want to buy your products, how can I pay?
A :You can pay via T/T , L/C , WEST UNION , ESCROW , PAYPAL , ETC.
Especially ESCROW, which is guaranteed by Alibaba.com. It is safe
and effective.
Q2: How can you guarantee the quality?
A: If you meet with quality problem, we promise to replace goods or
return your funds.
Q3: If we don’t find what we want on your website, what should we
do?
A: You can email us the descriptions and pictures of the products
you need, we will check whether we have them. We develop new items
every month, and some of them have not been uploaded to website in
time. Or you can send us sample by express, we will develop this
item for bulk purchasing.
Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to send 1pc for quality testing if we have the
item you need in stock.
Why choose us? 1. Let’s talk—we have NO barrier in language.
2. Request for more item information---there are nearly 2000
products for your option!
3. Write us for quotation---reply you within 24 hours,one quotation
could be ready in 2mins for a ready product.