|
[China]
Trade Verify
Address: NO1007，BUILDING B,GELUNBU,GUANGYI ROAD,LIANGXI DISTRICT 21400,WUXI CHINA
Contact name:ZHU
WUXI XINFUTIAN METAL PRODUCTS CO., LTD |
|
Verified Suppliers
|
|
|
AISI 300 Series 304 Stainless Steel Sheets Surface Finish 2B
1. Specifications for stainless steel sheet
Grade
| 201.304,304L,316,316L,310S,309S,301,321,2205,2507 |
Brand
| TISCO, LISCO, BAOSTEEL, BAOXIN, POSCO, JISCO, ZPSS |
Thickness
| 0.3-3.0mm |
Width | 1000,1219,1500 mm or as request |
Length
| 2438,3048or as request |
Size
| 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required |
Color
| Gold, black, sapphire blue, brown, bronze, purple, champagne gold, diamond, rose gold, rose red, etc |
Delivery Time
| 7~15 working days after the receipt of 30% deposit |
Packing
| Interlayer paper kraft paper Wooden pallet or according to customer's request. |
2. Chemical Composition for stainless steel sheet
C:≤0.08 ,Si :≤1.0 ,Mn :≤2.0 ,Cr :18.0～20.0 ,Ni :8.0～10.0,S :≤0.03 ,P :≤0.045
Pysical properties
| Tensile strength σb (MPa | ≥ 520
| Specific heat capacity(0 ~ 100 ℃, KJ kgK) | 0.50
|
| Conditions yield strength | σ0.2 (MPa) ≥ 205
| Thermal conductivity (W m. K) | (100 ℃), 16.3 21.5 (500 ℃)
|
| Elongation δ5 (%) | ≥40
| The linear expansion coefficient k. | (0 ~ 100 ℃), 17.2 (0 ~ 500 ℃) of 18.4
|
| Section shrinkage ψ (%) | ≥ 60
| Resistivity (20 ℃, 10 Ω m.) | 0.73
|
| Hardness | ≤ 187HB; ≤ 90HRB; ≤ 200HV
| The longitudinal elastic modulus (20 ℃, KN/mm) | 193 |
| Melting point (℃) | 1398 ~ 1454
| Specific heat capacity | 0.50 |
3. Advantages of stainless steel
1. mechanical properties: according to different types of stainless steel, mechanical properties are different, martensitic stainless steel has high strength, hardness, suitable for the manufacture of parts that are both corrosion resistant and require high strength, high wear resistance, such as turbine shaft, Stainless steel knives, stainless steel bearings, etc., austenitic stainless steel plasticity is very good, the strength is not high, but the corrosion resistance is the best in stainless steel, suitable for occasions that require very high corrosion resistance and low mechanical properties, such as chemical plants, fertilizers Plants, sulfuric acid, hydrochloric acid manufacturers of equipment materials, etc., of course, can also be used in submarines and other military industries, ferritic stainless steel mechanical properties are moderate, the strength is not high, but oxidation resistance, suitable for a variety of industrial furnace parts.
2.. Process performance: Austenitic stainless steel has the best process performance. Due to its good plasticity, it can be processed into various profiles such as plates and tubes. It is suitable for pressure processing. Martensitic stainless steel has poor hardness due to its high hardness.
