NJ310E Precision Roller Bearing Semi Locating Metric Needle Bearings Single Row Straight Bore

Semi Locating Cylindrical Roller Bearing Single Row Straight Bore NJ310E

Cylindrical roller bearing with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ

Single row cylindrical roller bearings with cage are suitable where:

• Bearing arrangements are subjected to very high radial loads
• Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
• Bearing arrangements must have very high rigidity
• Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
• High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
• The bearings should be separable (one bearing ring can be removed for easier mounting)

Semi Locating Cylindrical Roller Bearing Single Row Straight Bore Type NJ Specifications: