|
[China]
Trade Verify
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
Verified Suppliers
|
|
|
TT Series High Efficient Ceramic Vacuum Filter 24m3 For Separate Mine Slurry
The disc filter is a continuous vacuum filtration device for extracting the slurry in the production of phosphoric acid to separate the phosphoric acid from the phosphogypsum. It can also be used in the industrial sectors such as metallurgy, light industry and national defense.
It is driven by a motor through a V-belt, a circular worm gear
reducer, and is driven by a pair of star wheels and a blunt pin
wheel on the ring wheel to drive the ring carousel horizontally. A
plurality of trapezoidal vacuum and U-shaped tube filter discs are
mounted on the ring-shaped turntable, all made of high-grade
acid-resistant stainless steel material, and connected with an
acid-resistant rubber tube to the distribution head that rotates
synchronously with the center-mounted turntable. The dispensing
head is made of acid-resistant stainless steel. The casting is
manufactured with a suction filter at the bottom that can be
connected to the vacuum system. One cycle of each filter disc will
complete the cycle of initial filtration, one wash, two washes
(including acid absorption), reverse blowback slag discharge,
filter cloth rinsing and suction dry reset. The flipping action of
the filter disc is accomplished by a curved fork mounted on a
V-shaped fork and roller mounted on the filter disc shaft.
Application Field:
Filtration and dewatering of fine particulate materials in mining
metal mines, non-metallic minerals, environmentally friendly
sludge, cement, building materials and other industries.
Suitable Material:
Metal, non-metallic materials such as marble, granite,etc
| Basic Information of Filter Plate | ||
| Name | Parameters | |
| Water flux(pure water pressure 0.15MPa) | ≥6400L /h.m2 | |
| Pneumatic back flush test pressure | ≥0.5Mpa | |
| Assembly precision | Assembly ring plane and plate surface parallelism | ±0.2mm |
| Assembly ring plane and the plate spacing | 8±0.1mm | |
| Installation disk precision | Assembly hole center and diagonal error | ≤2mm |
| Each plate spacing for disk | 5±1mm | |
| The membrane surface abrasion total time (without scraper or other hard objects damage) | ≥7000h | |
| Poriness | ≥42% | |
| Bore diameter | 2um-10um | |
| Breaking strength | ≥30Mpa | |
Pictures:
Characteristics of Ceramic Vacuum Filter :
1. High vacuum degree(0.09-0.098MPa), filter cake has low water content.
2. Solid content of liquid the maximum is 25ppm, repeated application is available,drainage is lessened.
3. It can save 90% energy or above in contrast with traditional filter with low consumption and low cost.
4. Filter cake cleaning process is added to clean proper materials.
5. It combines PLC, computer and automatic valve control with high automatization.
6. Compact structure,covering less floor area,conventient installation and maintenance.
7. Advanced drainage system fits for any working conditons.
Application at site for Ceramic Filter:
