|
[China]
Trade Verify
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
Verified Suppliers
|
|
|
Tungsten Carbide Button Drill Bit , Diamond Drill Bit for Drilling Granite
Introduction of PDC:
Polycrystalline Diamond Compact(PDC), is manufactured with a diamond layer attached to a
carbide substrate. Combining the properties of both super hardness and abrasion resistance
of diamond with outstanding strength and toughness of tungsten carbide, PDC has been
widely used in mechanical industry,oil well drilling,geological prospecting drilling and coal mining.
It possess of high wear resistance like diamond, at the same time the impact resistance like hard
alloy and that’s made it the best material as a drill bit cutter. Reinforced PDC has higher dense
diamond powder, claw hard alloy substrate made the two layers solid as whole one. So,
there-inforced PDC of supper wear resistance, longer service life and high efficiency.
Description of coal mine rock drill bit:
PDC anchor shank bit is the most basic part of roadway support in coal mines. It can bound the
surrounding rock of roadway together, and make the surrounding rock to support itself. Roofbolt
drill bit is a kind of drilling tool for fixing anchor bolt of coal mine. The two wings of our PDC
roofbolt drill bit adopt PDC (Polycrystalline Diamond Compact) as the cutting tooth, the application
of PDC has greatly improved the drilling efficiency of roofbolt drill bit, and is taking the place of tungsten
carbide roofbolt drill bit gradually.
Features of coal mine rock drill bit:
1. The cutting tools adopts new type superhard material;shelf life of drill bit is high.
2. Drilling efficiency of medium hard and harder stratum can be greatly improved.
3. Cutting edge is wearable, no need of polishing, easy to operate.
Application of coal mine rock drill bit:
Anchor-shank drill bit with PDC cutter is mainly applied to the anchor network support hole drilling in
underground coal mine, transportation,water conservancy and hydrpower,etc.
Specification of coal mine rock drill bit:
| Type | D(mm) | H(mm) | Wings No. | PDC cutter | |||
| Shape | |||||||
| ZW28A | 28 | 48 | 2 | half | |||
| ZW28B | 28 | 48 | 2 | whole | |||
| ZW30A | 30 | 48 | 2 | half | |||
| ZW30B | 30 | 48 | 2 | whole | |||
| ZW32A | 32 | 48 | 2 | half | |||
| ZW32B | 32 | 48 | 2 | whole | |||
| ZW42B | 42 | 60 | 3 | Half+whole | |||
Special design is available upon your requirement. | |||||||
| Model | Application | ||||||
| Two-wings | Half-piece PDC drill bits | Soft-medium hard formation of f ≥ 5 | |||||
| Complete-piece PDC drill bits | Medium-hard formation of f ≥ 6 | ||||||
| Reinforced PDC drill bits | Hard formation of f ≥ 8 | ||||||
| Triple-wings | Half-piece PDC drill bits | Hard formation of f ≥ 6 | |||||
| Reinforced half-piece PDC drill bits | Hard formation of f ≥ 8 PDC drill bits and PDC cutters | ||||||
Mining Drilling Tools | Main Standard(mm) | |||
D | H | L | M | |
Thread joint | 27 | 44 | 17 | M14×1.5 |
27 | 54 | 17 | M12×1.75 | |
28 | 54 | 20 | M12×1.75 | |
29 | 52 | 18 | M14×1.5 | |
30 | 50 | 18 | M14×1.5 | |
32 | 52 | 22 | M14×1.5 | |
32 | 56 | 22 | M12×1.75 | |
Threaded Button Bit
| T38 button bit | ||||||
| Bit Dia. | Buttons and Size (mm) | Flushing Hole | Weight | |||
| mm | Front | Gauge | Front | Side | kg | |
| 1 | 64 | 3×10, 1×10 | 6×11 | 3 | - | 1.7 |
| 2 | 70 | 3×10, 1×10 | 6×12 | 3 | - | 1.8 |
| 3 | 76 | 3×11, 1×11 | 6×12 | 3 | 1 | 2.6 |
| 4 | 89 | 3×11, 2×11 | 6×13 | 3 | 1 | 3.3 |
| R38 button bit | ||||||
| Bit Dia. | Buttons and Size (mm) | Flushing Hole | Weight | |||
| mm | Front | Gauge | Front | Side | kg | |
| 1 | 64 | 3×11 | 6×12 | 3 | - | 1.8 |
| 2 | 70 | 3×10, 1×10 | 6×12 | 3 | - | 1.8 |
| 3 | 76 | 3×11, 1×11 | 6×12 | 2 | - | 2.6 |
| 4 | 89 | 4×13, 1×13 | 8×13 | 4 | - | 3.3 |
| R32 button bit | ||||||
| Bit Dia. | Buttons and Size (mm) | Flushing Hole | Weight | |||
| mm | Front | Gauge | Front | Side | kg | |
| 1 | 41 | 2×8 | 5×9 | 1 | 1 | 0.7 |
| 2 | 43 | 2×9 | 5×10 | 1 | 1 | 0.7 |
| 3 | 45 | 2×9 | 5×11 | 1 | 1 | 0.8 |
| 4 | 48 | 2×9 | 5×11 | 1 | 1 | 0.9 |
| 5 | 51 | 2×10 | 5×11 | 1 | 1 | 1 |
| 6 | 57 | 3×9 | 6×11 | 3 | - | 1.3 |
| 7 | 64 | 3×11 | 6×12 | 3 | - | 1.6 |
| 8 | 70 | 4×11 | 8×11 | 2 | - | 2.6 |
| 9 | 76 | 4×11 | 8×11 | 2 | - | 2.8 |
| R28 button bit | ||||||
| Bit Dia. | Buttons and Size (mm) | Flushing Hole | Weight | |||
| mm | Front | Gauge | Front | Side | kg | |
| 1 | 37 | 2×7 | 5×9 | 1 | 1 | 0.5 |
| 2 | 38 | 2×7 | 5×9 | 1 | 1 | 0.6 |
| 3 | 41 | 2×8 | 5×9 | 1 | 1 | 0.7 |
| 4 | 43 | 2×9 | 5×9 | 1 | 2 | 0.8 |
| 5 | 45 | 2×9 | 5×10 | 1 | 2 | 0.9 |
| 6 | 48 | 2×9 | 5×11 | 1 | 2 | 1 |
1. Methods of Payment
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
1. Our sales team will response for your question within 24 hours (Holidays Excluded)
2. Technical Support will be available in any time
3. Free replacement will provide once the failure confirmed caused by our product quality
Company Profile:
KSQ Technologies (Beijing) Co. Ltd. is a company that shall cater to the needs of the construction and mining industries, with consideration on providing solutions to the following unique problems:
