|
[China]
Trade Verify
Address: Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Contact name:Sekura Yu
Beijing Jincheng Mining Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
DTH rock well drill rig KG430SH Punching machine for hard rock rotary drilling rig
Application
The KG430S/KG430SH down the hole drill rig for open use is an improved device in compliance with national regulations on diesel-engine emissions.The drill rig is equipped with the two independent systems,namely diesel engine and motoe,capable of separate operations pressure and climbing capacity.
The expanded pitch and lifting-arm hydraulic cylinder enable it to
meet the requirements of limiting position. The double rotation
motor increases the rotary torque and revolving speed; and the
lifting hydraulic cylinder and chain are expanded to promote the
lifting force and reliability. The thickened profile folder is used
for the housing, thus improving its level of intensity and
rigidity; and the additional ring makes handling and lifting
convenient.
The KG430SH down the hole drill rig for open use is equipped with a
dust collector,thus making operation more environment-friendly and
reliable
Characteristics
KG series Blast Hole Drilling Rig for granite are specially designed drill equipment, which can be widely used for surface drilling such as quarry, railway construction, road construction, small to medium mining operation and etc. High performance features higher penetration rate with lower fuel consumption. Compressed air is used to operate crawler drill hammer for blast holes drilling, bench hole drilling, grout hole drilling, anchor hole drilling and etc.
Specifiction
| KG430SH drilling rig | |
| Model | KG430S/KG430SH |
| Rock rigidity | f=6-20 |
| Diameter of hole | Φ90-152mm |
| Depth of economical drilling | 25m |
| Rotation speed | 0-90r/min |
| Rotation torque | 4500N·m |
| Lift power | 40000N |
| Feed way | oil cylinder-leaf chain |
| Feed distance | 3980mm |
| Walk speed | 0-2.5Km/h |
| Gradeability | ≤30° |
| Ground clearance | 515mm |
| Weight | 6000kg |
| Size of drill machine | 6000x2250x2700 |
| Sliding carriage pitch angle | Blow 135°,up50°, total 185° |
| Sliding carriage swing angle | Left100°,right45°,total 145° |
| Sliding carriage suppling length | 900mm |
| Power | YCD4R23T8(59KW/2400r/min) |
| Drill pipe | Φ76x3000mm |
| Air consumption | 13-20m³/min |
| Max height of horizontal hole | 2900mm |
| Min height of horizontal hole | 750mm |
Packing& Delivery
Our Service
