|
[China]
Trade Verify
Address: Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Contact name:Sekura Yu
Beijing Jincheng Mining Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Crawler Mounted Hydraulic Water Well Drilling Rig with 112kw Diesel Power Type JKS400
Characteristics
1. The drilling rig can use air DTH Hammer drilling and mud drilling.
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency. 3.The main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4. It’s a hydraulicrotary drilling rig with directional circulation. It can equipped with BW350 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine,132kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6. The rotary head,have two gear,rotation speed is 0-50 and100rpm stepless adjustment and the rotary torque is 11000Nm.
7. The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8. It can set up a generator which is convenient to welding or illuminate for work at night.
9. Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
10. Competitive in price, low cost of maintain.
Application
CWD400 Multi-functional track mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad. JKS400 crawler mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
| 1 | Geology drilled | All kinds | |
| 2 | Drilling Type | DTH & Mud Rotary | |
| 3 | Drill system and operation | Hydraulic | |
| 4 | Hole Diameter | mm | Φ105—Φ400 |
| 5 | Hole Depth | m | 400 |
| 6 | Rotation Torque | N/M | 9000-11000 |
| 7 | Rotation Speed | rpm | 0-50 1st Gear |
| 0-100 2nd Ger | |||
| 8 | Drill pipe diameter | mm | 89/102/114/127 |
| 9 | Drill pipe length | mm | 3000/4500 |
| 10 | Max. Feed Speed | M/min | 0-25 |
| 11 | Max. Lifting Speed | M/min | 5-14 |
| 12 | Feed Stroke | mm | 5200 |
| 13 | Max. Lifting force | N/M | 250000 |
| 14 | Feed Cylinder Diameter | mm | 160 |
| 15 | Max.Pulldown Force | N/M | 85000 |
| 16 | Lifting force of Main winch(Optional) | T | 4 |
| 17 | Lifting force of hoist | T | 1.5 |
| 18 | Lifting height of tool winch | m | 40 |
| Engine | |||
| 19 | Diesel Engine type | CUMMINS | |
| 20 | Model | 6BT5.9-C150 | |
| 21 | Rated Horse power | Kw | 132 |
| 22 | Electrical System | Volt | 24 |
| Compressor required | |||
| 23 | Compressor Type | Rotary Screw/Movable | |
| 24 | Pressure Required | Mpa | 1.05—4.5 |
| 25 | Air consumption | m³/min | 16—60 |
| Mud Pump(Optional) | |||
| 26 | Type | Hydrulic | |
| 27 | Model | BW450 | |
| 28 | Stroke | mm | 110 |
| 29 | Displacement | L/Min | 450 |
| 30 | Discharge pressure (Mpa) | Mpa | 2-3 |
| 31 | Suction tube diameter | mm | 89 |
| 32 | Discharge pipe diameter | mm | 51 |
| 33 | Liner Diameter | mm | 80 |
| Hydraulic Welder(Optional) | |||
| 34 | Mnufacturer | Dynaset | |
| 35 | Welding current | A | 60-250 |
| 36 | Hydraulic Min.oilflow | L/min | 42 |
| 37 | Nom/Max Pressure | Bar | 190/210 |
| 38 | Voltage | V | 110/220VDC |
| 39 | Power | Kw | 1or2 |
| 40 | L*W*H | mm | 390*190*230 |
| Dimension | |||
| 41 | Net Weight | T | 14 |
| 42 | Shipping Length | mm | 8000 |
| 43 | Shipping Width | mm | 2300 |
| 44 | Shipping Height | mm | 3050 |
| 45 | Ground Clearance | mm | 300 |
Service
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely
the after sales service begin from the order confirmation, last for
the working life of the equipment.
Purchase Process
