Active Member
|
[China]
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Mr. Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
|
6 3/4" IADC635 Tricone Drill Bit TCI Roller Rock Bits For Water Well Drilling
KSQ tricone bit used for geoloical prospecting, development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.
Products Parameters:
| Bit Size | 6 3/4 inch (Outside Diameter) |
| Thread Connection | 3 1/2" REG API pin |
| IADC CODE | 635 |
| Bearing type | Elastomer sealed bearing bit with gauge protection |
| WOB (Weight On Bit) | Capacity 20,250-40,500 lb/in bit diameter |
| Rotary speed | Operating Speed 60-100 rpm |
| Make up torque | 28,000 - 32,000 ft-lbs |
| Tooth Type | TCI tooth bit |
| Formation | For medium hard and abrasive formation with high compresive strengh |
| API Type | API 7-1 |
Product Choose:
Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low
compressive strength, very soft formations. This bit maximized to
use of both conical and chisel tungsten carbide inserts of large
diameters and high projection. This cutting structure design,
combined with maximum cone offset, results in high bit penetration
rates. The deep intermesh of cutter rows prevents bit bailing in
sticky formations.
Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel
tungsten carbide inserts on the heel rows and inner rows. This
design provides a fast drilling rate and added cutting structure
durability in medium to medium hard for mations. The HSN rubber
O-ring provides adequate sealing for bearing durability.
Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and
abrasive formations. Wear resistance tungsten carbide inserts are
used in the outer rows to prevent loss of bit gauge. Maximum
numbers of hemispherical shaped inserts are used in all rows to
provide cutter durability and long life.
TCI series:IADC
CODE:417,437,447,517,527,537,547,617,627,637,647,737,837.
Sizes rang from 3 7/8" to 26"
| IADC | WOB KN/mm | RPM r/min | Application |
| 437/447/435 | 0.35-0.9 | 240-70 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone |
| 517/527/515 | 0.35-1.0 | 220-60 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
| 537/547/535 | 0.45-1.0 | 220-50 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
| 617/615 | 0.45-1.1 | 200-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
| 637/635 | 0.5-1.1 | 180-40 | hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble |
| Note: Above limits of WOB and RRPM should not be used simultaneously | |||
More Product Pictures:
Company Information:
The MIROC® Rock Drilling Tools product line by KSQ Technologies (Beijing) Co.Ltd. is the result of years of advanced engineering, precision manufacturing, and dedication to the use of high-quality materials.
MIROC® Rock Drilling Tools are used by many drilling professionals related to mining, construction, tunneling, and quarrying projects around the globe.
