Active Member
|
[China]
Address: Longhu Square,Zhengzhou City,Henan Province,China.Post Code: 450000
Contact name:Pinson
SUVEC Rock Drilling Tools |
|
|
12 degree Hex 19 Button Bit Taper Drill Bit For Rock Drilling Tools
Tapered drill bit is a further development of the integral system where a comprehensive selection of bits can be used on the same rod. There are two standard hex rod sizes - 22mm or 25mm in diameter and up to 8000mm in length and a wide selection of bit designs for hole sizes 27-41mm (11/16" to 15/8").
The tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together.
Our drills are produced by the most advanced production lines to be the most cost performance rock drilling tools which carry at least 80% of the perfomance compared with their counterparts e.g Atlas Copco or Sandivik but being sold at much lower prices.
Taper Drill Bit Is also widely Used In Metallurgy Mine, Geological Exploration, Water Conservancy Construction, Electricity, Traffic, Tunnel, Quarry, National Defence Stone Project Etc.
Our Drills have been exporoted all over The World, Like Germany, Spain, Italy, Russia, Japan, India, Australia, Mexico, Colombia, Brazil,Chile, South Africa...Etc. and has very Good Reputation Worldwide!
Product Name: | 12 degree Hex 19 Button Bit Taper Drill Bit For Rock Drilling Tools | |||
Types | Tapered chisel bits, Tapered cross bits, Tapered button bits | |||
Application:: | Tapered drill bits are used in granite and marble quarry, gold mine, railway, tunnel, etc. for drilling | |||
Feature: | Tapered drill bits connect tapered drill steel of rock drill for drilling holes | |||
Material: | High quality carbide and high quality steel | |||
MOQ: | No requirement for testing and trial order | |||
We can design and manufature according to your requirment of diameter, number air holes and carbide button shape. | ||||
Types of drill bits | Diameter (mm) | Taper Angle (Degree) | Length (mm) | Weight (kg) |
Tapered chisel bits | 20/22/28/30/32/34/36/38/40 | 4 degree/ 6 degree/ 7 degree/ 11 degree/ 12 degree | 50/55/60/71/80 | 0.15 - 0.45 |
Tapered cross bits | 24/26/28/30/32/33/34/35/36/3/38/40/42/48/50/55 | 50/55/60/71/80 | 0.18 - 0.7 | |
Tapered button bits | 28/29/30/32/33/34/35/36/37/38/40/41/42/45 | 50/55/60/71/80 | 0.2 - 0.5 | |
Parameter of the taper button bit:
Cemented carbide tapered button bits are made from high quality cemented carbide, produced with advanced technology and equipment, having different types bits, such as tapered chisel bit, tapered cross bit and tapered button bit which connected with tapered drill rod well for drilling hole, inserting depth is 25-30mm, obtaining maximum drilling speed, keeping stable and lowering rock drill working parameters so that prevent single button under overload then cause the button broken or lost.
1 Tapered chisel bit
Widely used in drilling holes with depth less than 5 meters and diameter ranged in 20-45 mm by light-duty rock drill, like Y6.
2 Tapered cross bit
Used under any rock drilling condition and mainly used for hard or very hard rock formation because of it's comprehensive adaptability. Compared with taper chisel bits, taper cross bits have a better drilling performance because of carbide tips on cross bits doubled.
3 Tapered Button Bits
Comparing with tapered chisel and cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical and parabolic button.
Cemented carbide tapered button bits widely used in gold mining, geological drilling, railway, highway, water conservancy and hydropower, tunnel working and granite and marble quarrying.
Advantages of our rock drill bits:
Compared with other brands, our advantages are as below:
1. Our products can match over 95% against the original
products e.g Atlas Copco or Sandivik but being sold at much
lower prices
2. Price are competitive against the famous brands and best quality
against the small factory
3. Recommended specification according to different rock formation
improves design and drilling speed
4. CNC processing procedure ensures the manufacturing precision and
quality consistency
5. Our technician has more than 20 year’s professional working
experience.
6. Rock drilling tools are exported throughout the world. Main
market: Norway, USA,Canada,Brazil, Uganda,UAE, Philippines,
Thailand etc.
1. Packing details : Wooden case and steel bundle.
2. Handling time for an order
Based on order quantity, normally it takes 15-30 days for
production.
Only 2 or 3 days if we have stock on your request size.
3. Shipping way
Sample order: We suggest Express like DHL/UPS/TNT/FEDEX/EMS or by
air.
Bulk order: We suggest by sea shipment.
Why choose our tapered drill bits?
1. Our rock drill rod connect with button bits perfectly for
drilling holes
2. Stable and mature welding technology ensure high quality of bits
3. Accurate dimension of taper degree perfectly matches the button
bits
4. work reliable and very cost-effective
5. Rod bodies manufactured from high grade steel and processed
using state-of-the-art CNC machinery and heat treatment
We specialize in rock drilling tools, including rock drill bits,tapered drill tools,threaded drill tools,Down the hole drilling tools ( DTH ), which are widely used in mining , quarrying , well drilling and construction . All these products are compatible with other world world leading brands such as Atlas Copco , Sandvik , Mitsubishi and Boart Longyear.
Test is the best way to find suitable rock drilling tools, for samples please Email drillbit@qq.com
