Automotive Part Cmm Fixtures Customized Help To Capture Measure Point

Customized CMM Holding Fixtures of Automotive Part Help to Capture Measure Point

Surface checks shall check the surface specified by the part print unless otherwise noted.

Surfaces shall be checked in one of the following methods:
1. Feeler pin
2. Scrape Fixture, in combination with hole location check using flush pin
3. Indicator check form or profiles with less than 0.5 mm tolerance will be constructed of hardened steel to 57 Rockwell C minimum.

There shall be a 31 mm offset for all variable gauging unless otherwise specified.

The use of thumbnail checks will be incorporated when applicable. (See figure on next page)

When flatness is called out and variable data is required, a variable indicator will have the ability to verify total flatness pass through or variable.

LMI and/or SPC ports shall be included when applicable.

Our production detail

Manufacturing tolerance:

1.The Flatness of Base Plate 0.05/1000

2.The Thickness of Base Plate ±0.03mm

3.The Location Datum ±0.02mm

4.The Surface ±0.1mm

5.The Checking Pins and Holes ±0.1mm

Process

CNC Machining(Milling/Turning), Grinding

Electroplating Chromium Treatment

Quality Control

CMM (3D Coordinate Measuring Machine), Vms-2515G 2D Projector, HR-150 A Hardness Tester

Third Party Certification done by ShenZhen Silver Basis Testing Technology Co., Ltd , ISO17025 Certified

Lead time & Packing

35 days after 3D design approved

7 days via express: FedEx

Standard Export Wooden Case

Primary Competitive Advantages

Pursuit Of Quality Excellence

Multiple Products & Services

Efficiency Consciousness-On-Time Delivery

Cost Consciousness-Innovative Design Solutions To Reduce The Cost

Timely Communication With Our Customer

Compliance With Cooperator’s Terms And Conditions

NDA(Non-disclosure Agreement)

Our purpose is that we can only succeed if our customers succeed.