Active Member
|
[China]
Address: NO.28988 Jingshi Road, Huaiyin District, Jinan, China
Contact name:Judy Chen
Sino Construction Equipment Co., Ltd |
|
|
QY25K5C Telescope XCMG Truck Crane 25t Hydraulic Mobile Crane Truck 33000kg
QY25K5C XCMG Telescope Truck Crane 25t Hydraulic Mobile Crane Truck
Highlights of QY25K5C XCMG Telescope Truck Crane 25t
Highlight 1: Leading lifting and driving performances
1. Five main U-type booms. The boom length is 10.6m-41.0m with strong lifting performance, leading ahead of products with the same tonnages in the same industry.
2. The new power system platform centers on 9L high-power engine of Shanghai Diesel Engine Co., Ltd, 9-gear overgear gearbox of Shanxi Gear Auto Drive Group Co., Ltd and large-ration double reduction axes of Meritor Axle Co., Ltd. It is of superior driving performances and the maximum gradeability reaches to 41%.
Highlight 2: Double-pump confluence technique, the working performance of amplitude of luffing and flexibility have been promoted by 30%
1. In addition to winch, confluence of telescopic extension and amplitude of luffing can be also achieved by the new main confluence valve that significantly improves work efficiency of products.
Highlight 3: New-structure special hydraulic-pressure radiator with high reliability under high temperature conditions
1. New-structure special hydraulic-pressure radiator, the radiator power (18KW) would be increased and heat dispersion performance would be promoted by 15%;
2. The layout of fuel hole position is reasonable and speed of hydraulic oil is uniform. The pressure loss is lowered by 33%, guaranteeing heat dispersion performance of products. Meanwhile, the reliability of continuous operation under high temperature conditions would be substantially promoted.
Highlight 4: New molding, humanized design and comfortable manipulation
1. New operating house, wheel house and machine shed. Novel appearances, fine lines of the complete machine appearance that shows international trends;
2. The rearview mirror is installed in operating house, easy to for observe the working environment; front pedal and push-and-pull pedal in left side are installed, easy access to the operating house;
3. Ladder stand is installed in two sides of the chassis, easy to get on or off the bus. In addition, tool cabinet is installed in right rear side of the frame, easy to store tools attachment for users, fully representing the purpose of humanized design.
Specification of QY25K5C XCMG Telescope Truck Crane 25t
| Item | Unit | Data |
| Model | - | QY25K5C |
| Size parameters | ||
| Overall length | mm | 12850 |
| Overall width | mm | 2550 |
| Overall height | mm | 3480 |
| Wheelbase | mm | 4500+1350 |
| Track | mm | 2059 (Hande) 2074 (Meritor) / 1834/1834 |
| Weight parameter | ||
| Total operating weight | kg | 33000 |
| Axle load | kg | 7400/12800/12800 |
| Dynamic parameter | ||
| engine model | - | SC9DF300.1Q5 |
| Engine rated power | kw/(r/min | 221/2200 |
| Engine rated torque | N.m/(r/min | 1250/1400 |
| Driving parameters | ||
| Top speed | km/h | ≥90 |
| Minimum stable driving speed | km/h | 2.5～3 |
| Turn | ||
| Minimum turning diameter | m | ≤21 |
| Minimum turning diameter of boom | m | ≤25.58 |
| Maximum grade | ％ | ≥40 |
| Minimum ground clearance | mm | 250 |
| Approach angle | ° | 11 |
| Departure corner | ° | 13.5 |
| Braking distance | m | ≤10 |
| Fuel consumption per hundred kilometers | L | 30 |
| Main performance parameter | ||
| Maximum rated total lifting capacity | t | 25 |
| Minimum rated amplitude | m | 3 |
| Lifting moment of basic boom | kN·m | 1132 |
| Turntable radius | mm | 3550 (balance weight) |
| Outrigger | ||
| Vertical | m | 5.5 |
| Horizontal | m | 6.4 |
| Lifting height | ||
| Basic arm | m | 10.1 |
| Longest main arm | m | 40.7 |
| Longest main arm + jib | m | 50.2 |
| Longest main arm + jib + extension | - | - |
| Boom length | ||
| Basic arm | m | 10.8 |
| Longest main arm | m | 42 |
| Longest main arm + jib | - | 51 |
| Longest main arm + jib + extension | m | - |
| Working speed | ||
| Turning speed | r/min | ≥2.5 |
Our advantages:
1) Original parts and good working condition;
2) Low working hours and high working efficiency;
3) Strong working power and stability;
4) Complete accessory and no oil leaking;
5) Competitive price and good skills;
6) Good After-sales Service
FAQ:
1. How to guarantee the condition and lifetime of the machine ?
A: All our exported machine are New and Original brand, pass pre-delivery quality testing!
We are responsible for our trucks and machine quality.
2. How to have after sale service from us ?
A: We have old suppliers in China, original new parts are available for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your journey in China, welcome your happy visit.
