Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
XCMG 30Ton 350HP GR3505 Mining Motor Grader Forward Speed 45Km/h Warranty 1 Year
The motor grader is mainly used for ground leveling, ditching,
slope scraping, bulldozing, scarification, snow removal for large
areas such as highway, airports, farmlands etc. It is the necessary
construction machinery for national defense construction, mine
construction, urban and rural road construction and water
conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. The friction-disc worm gearbox with overload protection is
developed for the mining heavy load condition, which can slip
automatically and protect the safety of the machine and personal.
2. Load sensing hydraulic system is equipped with variable piston
pump and load sensing multi-way valve, in order to improve
operation comfort, the pilot independent electrical proportional
valve, the main directional valve and relief valve are proportional
valves.
3. The service brake is a double-loop hydraulic braking system.
4. For serious environment condition, to analyze the matching
analysis of the cooling system, conduct flow field analysis to
power compartment machine, reasonable layout of the cooling holes,
seal the clearance around the radiator, form the"chimney effect" of
air duct design, reduce the hot air vortex. At the same time, the
optimized hood design, spray anti-vertigo paint, beautiful shape.
5. The same time using ROPS&FOPS cabin to meet ISO standard.
Equipped with air conditioning, adjustable suspension seat,
equipped with wipers and defrosting vents to improve the comfort of
operation.
6. Spacious cabin design, three-dimensional air duct, good driving
experience. Double handle operation can be selected on the handle
operation, reducing the labor intensity by about 80%.
Product Paramenters
Item | GR3505 | ||
Basic parameters | Engine model | QSM 11 | |
Rated power/speed | 261kW/2100rpm | ||
Overall dimension (standard) | 11250X3180X3820 | ||
Total weight (standard) | 30000kg | ||
Tire specification | 23.5R25 | ||
Ground clearance (front axle) | 500mm | ||
Tread | 2580mm | ||
Space of front and rear axles | 7200mm | ||
Space of middle and rear wheels | 1960mm | ||
Performance parameters | Forward velocity | 5,8.5,13,20,30,45km/h | |
Reverse speed | 5,13,30km/h | ||
Tractive effort f=0.75 | 165kN | ||
Maximum gradeability | 25% | ||
Tire inflation pressure | 320kPa | ||
Working system pressure | 25MPa | ||
Working parameters | Maximum steering angle of front wheel | ±45° | |
Maximum slant angle of front wheel | ±17° | ||
Maximum oscillating angle of front axle | ±15° | ||
Maximum oscillating angle of equilibrium box | ±15° | ||
Maximum steering angle of frame | ±22° | ||
Minimum turning radius | 8.9m | ||
Scrape knife | Maximum lift height | 450mm | |
Maximum cutting depth | 500mm | ||
Maximum tilt angle | 65° | ||
Cutting angle | 28°—70° | ||
Angle of revolution | 360° | ||
Length & chord height | 4877x787mm | ||
Oil filling amount | Coolant | 50L | |
Fuel tank | 550L | ||
Engine | 37L | ||
Transmission | 38L | ||
Balancing box | 186L | ||
Drive axle | 106L | ||
Hydraulic oil | 310L |
Product Show