|
[China]
Trade Verify
Address: Rm.2905, 29th Floor, Jin Boda Plaza, CBD, Yongcheng, Shangqiu, Henan, China
Contact name:Jessie
Henan Harvest Machinery & Truck Co., Ltd |
|
Verified Suppliers
|
|
|
XCMG 200Hp GR2003 16 Ton Motor Grader Engine Brand Cummins Forward velocity 38Km/h
The motor grader is mainly used for ground leveling, ditching,
slope scraping, bulldozing, scarification, snow removal for large
areas such as highway, airports, farmlands etc. It is the necessary
construction machinery for national defense construction, mine
construction, urban and rural road construction and water
conservancy construction, farmland improvement and so on.
1. Energy-saving and noise-reducing: adopt low-speed engine
transmission line, low specific fuel consumption of rated point,
energy saving and environmental protection; low-speed ratio
configuration of transmission system, average fuel consumption
reduced by about 8%
2. Strong Power: Adopting Sichai High-efficiency State III Variable
Power Engine.
3. With load rotation: to improve the hydraulic system pressure,
blade rotary force greatly improved, high-frequency quenching gear
ring, wear resistance and life expectancy, to achieve load
rotation.
4. Efficient operation: The displacement of the hydraulic pump and
the hydraulic motor is increased.
Product Paramenters
Item | GR2003 | ||
Basic parameters | Engine model | SC9DK200.1G3 | |
Rated power/speed | 147kW/2200rpm | ||
Overall dimension (standard) | 8900x2625x3420mm | ||
Total weight (standard) | 16000 kg | ||
Tire specification | 17.5-25 | ||
Ground clearance (front axle) | 430mm | ||
Tread | 2156mm | ||
Space of front and rear axles | 6219 mm | ||
Space of middle and rear wheels | 1538 mm | ||
Performance parameters | Forward velocity | 5/8/11/19/23/38km/h | |
Reverse speed | 5/11/23km/h | ||
Tractive effort f=0.75 | 82 kN | ||
Maximum gradeability | 25% | ||
Tire inflation pressure | 260kPa | ||
Working system pressure | 20MPa | ||
Transmission pressure | 1.3-1.8Mpa | ||
Working parameters | Maximum steering angle of front wheel | ±48° | |
Maximum slant angle of front wheel | ±17° | ||
Maximum oscillating angle of front axle | ±15° | ||
Maximum oscillating angle of equilibrium box | ±15° | ||
Maximum steering angle of frame | ±27° | ||
Minimum turning radius | 7.3m | ||
Scrape knife | Maximum lift height | 400mm | |
Maximum cutting depth | 500mm | ||
Maximum tilt angle | 90°
| ||
Cutting angle | 28°-70° | ||
Angle of revolution | 360° | ||
Length & chord height | 4270x610mm | ||
Oil filling amount | Coolant | 50L | |
Fuel tank | 280L | ||
Engine | 24L | ||
Transmission | 38L | ||
Balancing box | 46L | ||
Drive axle | 28L | ||
Product Show
