Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
XCMG 19 Ton GR2605II Motor Grader Forward velocity 47km/h Warranty 1 Year Engine Cummins
1. Utilizing load sensitive hydraulic system, small control force,
good control feeling, realizing micro control.
2. Engine variable power control technology, more energy efficient.
3. Intelligent fan control technology enables fan speed changing
with the real-time detected system temperature, low energy
consumption and low noise.
4. Wet type brake axle, long lifetime, higher reliability.
5. Elevated cabin allows bigger operation space.
6. Optimal arrangement of the air conditioning flue, integration
with cab interior design, better air conditioning effect.
7. Advance antivibration and noise reduction technology, low noise
of the whole machine.
8. The working device is more reliable with the integral angle
position device, high strength rotary support and overload
protection worm gearbox.
The motor grader is mainly used for ground leveling, ditching,
slope scraping, bulldozing, scarification, snow removal for large
areas such as highway, airports, farmlands etc. It is the necessary
construction machinery for national defense construction, mine
construction, urban and rural road construction and water
conservancy construction, farmland improvement and so on.
Product Paramenters
Item | GR2605II | ||
Basic parameters | Engine model | QSB6.7 | |
Rated power/speed | 194kW/2200rpm | ||
Overall dimension (standard) | 9370x2800x3522 | ||
Total weight (standard) | 19000 kg | ||
Tire specification | 20.5-25 | ||
Ground clearance (front axle) | 620mm | ||
Space of front and rear axles | 6531 mm | ||
Space of middle and rear wheels | 1622 mm | ||
Performance parameters | Forward velocity | 5,8,11,19,26,47km/h | |
Reverse speed | 5,11,26km/h | ||
Tractive effort f=0.75 | 99kN | ||
Maximum gradeability | 25% | ||
Tire inflation pressure | 350kPa | ||
Working system pressure | 22MPa | ||
Transmission pressure | 1.85-2.2Mpa | ||
Working parameters | Maximum steering angle of front wheel | ±48° | |
Maximum slant angle of front wheel | ±17° | ||
Maximum oscillating angle of front axle | ±15° | ||
Maximum oscillating angle of equilibrium box | forwards15°, Reverse15° | ||
Maximum steering angle of frame | ±20° | ||
Minimum turning radius | 7.9m | ||
Scrape knife | Maximum lift height | 480mm | |
Maximum cutting depth | 715mm | ||
Maximum tilt angle | 90° | ||
Cutting angle | 29°-69° | ||
Angle of revolution | 360° | ||
Length & chord height | 4270x610mm | ||
Oil filling amount | Coolant | 50L | |
Fuel tank | 270L | ||
Engine | 24L | ||
Transmission | 38L | ||
Equilibrium box | 170L | ||
Drive alex | 44L | ||
Hydraulic oil | 190L |
Product Show