Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
XCMG Small Construction Mobile Crane XCR30 30 Ton Rough Terrain Crane
1. The total rated loads given in the rated load charts are the
maximum lifting capacity when the crane is set up on firm and level
ground, which includes the weight of the hook block and slings. The
weight of above-mentioned devices should be deducted from the rated
lifting load.
2. The working radius shown in the rated load charts is the radius
when the load is lifted off the ground, and it is the actual value
including loaded boom deflection. Take boom deflection into
consideration before beginning a lifting operation.
3. A lifting operation is permissible only when the wind force is
below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure
is 125 N/m2).
4. Before beginning lifting operation, the operator should know the
weight of the load to be lifted and its working range, and then
select proper working conditions. Never operate the crane beyond
the limit shown in the chart. Use the lower value from the chart
when the boom length or working radius is between the range of
values.
5. Observe the boom angle limit. Never operate the crane with the
boom angle beyond the recommended limit even if a load is not being
carried. Otherwise, the crane will tip.
6. The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
Specification
Project | Unit | Parameter |
Measurements Parameters | ||
Wheel Base | (mm) | 3600 |
Wheel Track | (mm) | (Front/Rear)2300/2300 |
Weight Parameters | ||
Gross Vehicle Weight When Driving | (kg) | 27334 |
Axle Load | (kg) | (1st axle/2nd axle)13157/13763 |
Kinetic Paremeter | ||
Engine Type | - | B6.7 |
Engine Net Power | (kw/[r/min]) | 145 |
Driving Parameters | ||
Driving | ||
Max Travel Speed | (km/h) | 41 |
Min Travel Speed | (km/h) | 1.6 |
Swerve | ||
Min Turning Radius | (m) | 9.6 |
Max Gradeability | (%) | 78 |
Min. Ground Clearance of Machine | (mm) | 345 |
Approach Angle | (°) | 20.5 |
Departure Angle | (°) | 19.6 |
Braking Distance | (m) | 9 |
Major Performance Parameters | ||
Max. Rated Lifting Capacity | (t) | 30 |
Min. Rated Range | (m) | 3 |
Max. Load Moment of Basic Jib | (kN·m) | 989.8 |
Radius of Gyration of Turntable Tail | (mm) | 3823 |
Outrigger | ||
Longitudinal | (m) | 6.8 |
Horizontal | (m) | 6.8 |
Max. Lifting Height | ||
Basic Boom | (m) | 10.2 |
Longest Main Boom | (m) | 34.4 |
Longest Main Boom + Auxiliary Boom | (m) | 42.2 |
Boom Length of Crane | ||
Basic Boom | (m) | 10.8 |
Longest Main Boom | (m) | 35 |
Longest Main Boom + Auxiliary Boom + Extension | - | - |
Crane Picture