Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
XCMG 0.35m Milling Width 120mm Deep Road Milling Machine XM353 with Detuz Engine
XM353 is a municipal maintenance type milling machine, which is mainly used in milling operation for city streets and country roads, can also be used on small scale of pavement maintenance pavement marking, milling around the manhole cover, pit slot digging, etc.; Besides, it can be used as auxiliary equipment of large milling machine, to meet the requirement of edge milling planing.
* Walking system: low speed three wheel walking, driven by full
hydraulic system, which resolves the low gradeability and slipping
phenomenon and cost reduction.
* Suspension system: rear wheel is independent suspension-type
supporting wheel. The right rear wheel can swing back inward, easy
to mill the edge.
* Milling system: adopt hydraulic mechanical transmission
mode,stable and powerful; lmport tool bit, ensure the service life
of the cutting tools.
* Milling depth control: right and left rear legs allow lifting
adjustment and wedge-shape milling; Depth indicator is installed on
the rear leg, to show the milling depth. This device has optional
automatic leveling system.
* Steering system: full hydraulic steering, convenient and flexible
manipulation.
* Sprinkler system: fan shaped nozzles spray the water to the tool
bits for cooling, at the same time also reduce the dust diffusion.
The large capacity water tank can make the machine continuous work
for longer hours. Electric pumps, high pressure spraying, sprinkler
nozzles are easy to disassembly and clean.
* Brake: two systems of service braking and parking braking.
* Lighting system: this machine is equipped with night work head
lamp, convenient for operation at night.
Specification
Item | Unit | XM353 |
Milling width | mm | 350 |
Maximum milling depth | mm | 120 |
Tool nose distance | mm | 12 |
Number of tools | 36/48 | |
Rotor diameter with tool | 580 | |
engine model | BF4M2012-10T3R | |
Rated speed | rpm | 2200 |
Rated power | kw | 72 |
Emission Standards | Euro III | |
Fuel tank | L | 110 |
Hydraulic oil tank | L | 70 |
Water tank | L | 260 |
Working speed | m/min | 0-40 |
Walking speed | km/h | 0-5.6 |
Theoretical climbing ability | % | 50 |
Total weight | kg | 4800 |
Minimum milling radius | mm | 130 |
Ground clearance | mm | 120 |
Picture