|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
IMU560 series GPS+MEMS Dual System Inertial Navigation Module/gps module rs232
Application
●Moving attitude unit
●Car navigation and measurement and control system
●High-speed train measurement and control system
●Surveying and mapping POS system
●Ship and ocean engineering
●Ocean and underwater mapping
●Flight control
The IMU560 series is positioned as a vehicle/shipborne general
inertial and integrated navigation product,
target market:
(1)Dynamic communication
(2)Vehicle navigation
.
According to the rotation order of Z-Y-X, when the
positive direction of the X-axis is directed to the front of the
carrier, the angle of rotation around the Z-axis is the heading
angle, the angle of rotation around the Y-axis is the pitch angle,
and the angle of rotation around the X-axis is the roll angle. .
index | IMU560 | Unit | ||||
gyro | ||||||
Range | ±300 | °/s | ||||
Zero bias instability(Allan) | 10 | °/h | ||||
Zero bias stability(10s mean) | 20 | °/h | ||||
Zero bias repeatability | 20 | °/h | ||||
Nonlinear error | <0.1% of FS | |||||
Scale factor non-linearity1 | <0.02 | % | ||||
Scale factor repeatability | 200 | ppm | ||||
Resolution | <0.005 | °/s | ||||
accelerometer sensitivity | <10°/h/g,rms Direction | °/h/g,rms | ||||
Angle random walk | <0.15 | °/√hr | ||||
Bandwidth | 250 | Hz | ||||
Delay | <4 | ms | ||||
Accelerometer | ||||||
Range | ±2 | g | ||||
Zero bias stability | 0.2 | mg | ||||
Full temp. zero bias | 1.7 | mg | ||||
Scale factor repeatability | 200 | ppm | ||||
Resolution | 0.1 | mg | ||||
Non-linearity2 | 0.05 | % | ||||
Bandwidth | 125 | Hz | ||||
1. The power supply should be 9-36V DC, the ripple is <50mV, and
the current is at least 0.5A. If the power supply noise is large
and the power supply line is long, please use a filter or an
external voltage regulator.
2. The IMU application M4 semi-circular head screw is fixed on the
carrier, and the looseness during operation will affect the
measurement accuracy.
3. If possible, install it at the center of gravity of the carrier
or near the center of gravity.
4. Try to avoid severe vibration, sudden temperature changes (such
as installed next to the engine), and use shock absorbers if
necessary.
5. Align the IMU axis with the carrier axis as much as possible.
Dimension
