|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Download the data sheet of HCM600/HCM605B compass sensor
HCM600B HCM605B DYNAMIC ANTI-INTERFERENCE 3D ELECT...
▶ FEATURE
★ Heading Accuracy: 0.3°～0.5°
★ Roll Range:±180°
★ Tilt Resolution: 0.1°
★ Tilt Accuracy: <0.2°(Full Range)
★ Wide Temp.Range: -40℃～+85℃
★ Dimension: L110×W19.5×H19.5mm
★ With Hard-Soft Magnetic And Tilt Compensation
★ RS232/RS485/TTL
▶ APPLICATION
★ Satellite Antenna Search Satellite
★ Marine Navigation Surveying And Mapping
★ Gps Integrated Navigation
★ Antenna Servo Control
★ Gun Emission System
★ Infrared Imager
★ Laser Range Finder
★ Map For Plotter
★ Rov Underwater Robot Navigation
★ Oceanography Measurement Instruments
★ Special Occasion Robot
★ Unmanned Aircraft
▶ PRODUCT INTRODUCTION
HCM600/HCM605 is a dynamic and high-precision 3 axis electronic compass, which integrates three-axis accelerometer, three-axis gyroscope and three-axis magnetic sensor. The roll angle, pitch angle, and heading angle data are dynamically calculated in real time through a 32bit high-speed processor. , it has three working modes: pure compass, 9-axis fusion mode and 9-axis fusion anti-jamming mode (anti-temporary-interference), using a three-axis accelerometer and a three-axis gyroscope to compensate heading angle error caused even by big tilt angle, and adopting hard iron and soft iron calibration algorithms, so that the roll angle can still provide a high-precision heading angle within the range of ±180°. It is long strip shape with width of only 1.95CM. with high performance, reliability, small size and low power consumption, it is suitable for measuring attitude and heading angles in many fields such as antenna stability, vehicles, and drones. User can order complete product with housing (up to IP67 waterproof level) or compass module.
 HCM600B/HCM605B parameters | ||
| heading | Heading accuracy | 0.5° tilt<10° |
| Resolution | 0.1° | |
| Tilt parameters | Pitch accuracy | 0.1°<15°(measure range) |
| 0.1°<30°(measure range) | ||
| 0.1°<60°(measure range) | ||
| 0.2°<85°(measure range) | ||
| Pitch range | ±85° | |
| Roll accuracy | 0.1°<15°(measure range) | |
| 0.1°<30°(measure range) | ||
| 0.1°<60°(measure range) | ||
| 0.2°<180°(measure range) | ||
| Roll range | ±180° | |
| Resolution | 0.1° | |
| Calibration | Hard iron calibration | Yes |
| Soft iron calibration | Yes | |
| Magnetic interference calibration | Rotate 360deg horizontally; vertical rotation(option) | |
| Physical feature | Size | L111.5×W19.5×H19.5mm |
| Weight | ≤85g(exclude cable) | |
| RS232/RS485/TTL | 5PIN quick plug connector | |
| interface | Start delay | <50ms |
| Max output speed | 20Hz/s | |
| Communication speed | 2400 to 115200baud (default 9600) | |
| Output format | Binary High-performance Protocol | |
| Power | Power voltage | (default) DC+5V |
| Current(max) | 30mA | |
| Ideal mode | 26mA | |
| Hibernate mode | TBD | |
| Environment | Operating range | -40℃～+85℃ |
| Storage temperature | -40℃～+85℃ | |
| Vibration resistance | 100g | |
| Protection | IP67 | |
| Electromagnetic compatibility | According to EN61000 and GBT17626 | |
| MTBF | ≥40000 hours/time | |
| Insulation resistance | ≥100mego-ohm | |
| Impact resistant | 100g11ms, 3 Axial Direction (Half Sinusoid) | |
| Anti-Vibration | 10grms, 10~1000Hz | |
