|
[China]
Trade Verify
Address: No.A of RuiLian Industrial Zone, ShuGuang East Street, Raoyang City, Hebei Province,China
Contact name:admin
Hebei Xiangyi metal products Co., Ltd |
|
Verified Suppliers
|
|
|
Product name :Cupped head insulation pins Material:galvanized steel Pin diameter:2.7mm Pin length :7/8" Head size:30mm Annealing: all steel pins are fully annealed unless otherwise specified. Washer: Low carbon steel & zinc plating. Cupped Head Insulation Pins simplify the permanent installation of "Duct Liner" or other insulation materials to duct work or to other heating, ventilating or air conditioning
sheet metal configurations and housings. This product is usually applied with a capacitor discharge stud welder. Used for securing insulation. Also used as a hook-less lacing anchor to secure insulation inside fabricated blankets. |
| base size | base material | pin diameter | pin length | pin material | finished |
| 20MM | mild steel, stainless steel, copper | 2.7MM,3MM, 3.4MM | 10MM, 25MM, 38MM | mild steel, stainless steel, copper | zinc/ copper plating |
| 25mm | mild steel, stainless steel, copper | 3mm | 10mm-65mm | mild steel, stainless steel, copper | zinc/ copper plating |
| 30mm | mild steel, stainless steel, copper | 3.4mm | 10mm-65mm | mild steel, stainless steel, copper | zinc/ copper plating |
| custom | custom | support custom | support custom |
 |  |
Head diameter:30mm Pin diameter:2.7mm Pin length:1" with paper washer | Head diameter:30mm Pin diameter:2.7mm Pin length:1" without paper washer |
Recommended assembly method:
1.Work surfaces should be clean and dry, free of dust, grease, oil
and any other loose matter.
2.Remove the protective release paper taking care not to touch the
adhesive.
3.Place the hanger in the required position and press the base
against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with
fastening clips but maximum strength
of adherence is achieved after 24 hours
| Product | Quantity | Box size | Weight |
| 12Gauge 3/8” cup head weld pins | 1000Pcs | 26×26×8CM | 2.85KG |
| 12Gauge 7/8” cup head weld pins | 1000Pcs | 26×26×11CM | 3.5KG |
| 12Gauge 1” cup head weld pins | 1000Pcs | 26×26×11CM | 3.7KG |
| 12Gauge 1-1/8” cup head weld pins | 1000Pcs | 26×26×13CM | 4.2KG |
| 12Gauge 1-7/8” cup head weld pins | 1000Pcs | 26×26×18CM | 4.85KG |
| 12Gauge 2” cup head weld pins | 1000Pcs | 26×26×18CM | 4.95KG |
| 12Gauge 3” cup head weld pins | 1000Pcs | 26×26×18CM | 7.05KG |
| 12Gauge 4” cup head weld pins | 1000Pcs | 26×26×32CM | 7.6KG |
Hebei Xiangyi metal products company is a insulation
fasteners/insulation anchors manufacturing company,
we produce all kinds of insulation pins and washers.can make mold according your drawing pic ,Our products
is as following :
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
Special design can contact us make new mold as your pic or drawing pic !
