Home Companies ANHUI ZENVO TECHNOLOGY CO., LTD

34.5 Ton Per Batch Grain Dryer Modularized Production With Imported NSK Bearings

ANHUI ZENVO TECHNOLOGY CO., LTD

Contact Us

[China] country

Trade Verify

Address: Room 1103, Building 6, Lanyang Yuan Baohe District, Hefei, Anhui, China

Contact name:Wallace Wang

Inquir Now

ANHUI ZENVO TECHNOLOGY CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

34.5 Ton Per Batch Grain Dryer Modularized Production With Imported NSK Bearings

Country/Region china
City & Province hefei anhui
InquireNow

Product Details

30 ton per batch grain dryer for wheat with imported NSK bearings

 

This product consists of dryer cabin, elevator, online moisture meter and computer controlling system. It adopts optimized structure, reasonable material, advanced workmanship, modularized production to ensure the product quality. The dryer is enviroment friendly and low cost. The key indicators such as unevenness, cracking rate and broken rate of dryed grain are in the leading level of China.

 

Technical Advantages:

 

1) Successfully developed an integrated adapted drying control system which can maximize drying efficiency, reduce energy consumption and increase labor productivity, which is an advanced technology in China.

2) The special dust removal and impurity removal system design can perfectly clean out the grain impurities out into the boiler cycle as a biomass fuel, provide heat energy for drying, thus it is more engery-efficient and more enviromentally friendly.

3) Diversified drying methods option, including steam drying, biomass fuel hot air drying, fuel drying etc.

4) Utilize stainless steel mesh for the drying layer and the bottom of dryers, use the material properties, such as stainless steel thermal conductivity and wear resistance, to improve the drying rate and extend the service life.

5) Adopt imported brand motors for elevator and rotary valve, which can run 20,000 hours without adding oil.

6) The imported NSK bearings have longer service life and lower noise.

7) Auger leaves adopts high quality stainless steel material, which are more durable and wear-resistant.

 

Low-temperture Grain Dryer Specification
Model5HPS-30
Loading capacityPaddy(kg)5500-30000
 Wheat(kg)6500-34500
Dimension(mm)H12150
 L4300
 W3514
Electric PowerVoltagethree phase 380V,single phase 220V/50Hz
 Total Motor power (kw)19.55
FunctionLoading time(min)paddy55-65
  wheat50-60
 Unloading time(min)paddy60-70
  wheat55-65
 Drying rate (%/h)0.6-1.2
DeviceSafety Devicefull load buzzer,thermal-over relay,temperature controller,hot air temperature sensor,overload protection device,leakage protection device
   
 Standard Deviceonline moisture monitor,grain temperature sensor,fault removal sensor
1.Specification is subject to change without notice.
2.The parameters are just for reference.The moisture of the paddy is from 24% to 15% and 28% to 12.5% for wheat.Actual datas will be differed from variety,moisture content and temperature.

Hot Products

30 ton mixed flow grain dryer with eight groove and thin layer Technical Features: Double transverse ...
30 ton per batch grain dryer with eight groove and thin layer Technical Features: Double transverse ...
200 ton per day continuous mixed flow type corn dryer with 2000 ton silo Structure of the dryer: ...
15 ton per batch Paddy Dryer for Parboiling Plant with mixed flow technology Features: Mixed flow ...
300 Ton Per Day Maize Dryer With Continuous Mixed Flow Technology ZENVO has a leading position ...
22 Ton per Batch Maize Dryer with Mixed Flow Drying Method Features: Mixed flow dryer is widely used ...