Active Member
|
[China]
Address: Wulong industrial park.,Zhengzhou,Xingyang City,China
Contact name:Maxwell
Henan Fair Machinery And Equipment Co. LTD |
|
|
Double Horizontal Dry Powder Mixer 4 Party Twin Shaft Paddle Mixer Powder Mixing
Fier twin shaft mixer is the dry powder mixing station, dry mortar
production line equipment, and concrete batching plant in the most
important part of the whole set of equipment, the mixing system is
completely dominated by it.
And also often seen in feed mills and compound fertilizer factories
It Mixing time is about 0.5-3 minutes (batch every 90 seconds),
mixing uniformity Cv≤2%, and can be equipped with liquid adding
system;
The discharging door adopts a gate-type door, discharging is clean
and quick, with less residue.
The features of FIER Twin shaft mixer
1. Wide application: widely used in mixing powdery, granular,
flaky, miscellaneous and viscous materials in feed, grain,
chemical, pharmaceutical and pesticide industries;
2. Short mixing cycle and high mixing uniformity: the mixing
uniformity CV of general materials within 50-90s is ≤5%, which
reduces the mixing time and improves the production efficiency of
feed mill;
3. Large variable loading range: the variable loading coefficient
range is 0.3 ~ 0.8, suitable for mixing with materials of different
specific gravity and particle size in many industries;
4, mixing does not produce segregation: after mixing evenly within
1 minute, the machine will continue mixing materials without
grading phenomenon, and will not produce segregation due to the
large difference in specific gravity, particle size and other
physical properties, also known as weightless mixer;
5. Quick discharging and small residual amount: the bottom adopts
four-door structure, discharging quickly and leaving little
residue;
6. Large amount of liquid: adding 30% liquid can still mix the
material evenly, that is, it can mix the viscous material;
7. Unique chain tensioning mechanism is adopted to make
installation, disassembly and adjustment fast and convenient;
8. Reliable discharge door seal: The discharge door adopts airbag
seal, which is reliable, long service life and easy to replace;
9. Convenient installation, disassembly, and maintenance: FIER twin
shaft mixer design is W type mixing room, built-in air duct,
integral machine stand, side access door, beautiful appearance.
2. Technical Parameters of Fier industrial mixer
Type(FMZZ-) | Power(kw) | Cylinder size(mm) | Dimension (mm) LWH |
1T | 5.5 | Φ850×1250 | 2140x900x1325 |
2T | 7.5 | Φ1050×1875 | 2940x1300x1800 |
3T | 11 | Φ1050×3530 | 3315x1300x1800 |
5T | 15 | Φ1400×2500 | 3850x1700x2240 |
10T | 22 | Φ1600×3000 | 4400x1700x2560 |
15T | 30 | Φ1600×4200 | 5250x1850x2600 |
20T | 37 | Φ1850×4300 | 6250x1900x2545 |
30T | 45 | Φ2300×4500 | 6300x2300x3150 |
50T | 50 | Φ3500*5000 | 7500x2700x3200 |
Features and advantages:
◆ Fast mixing speed, mixing time of each batch: 0.5-2.5min;
◆ Fier Twin-shaft mixer not easy to produce segregation when mixing
materials with different physical properties such as specific
gravity, particle size and shape;
◆ High mixing uniformity, coefficient of variation CV ≤ 5%;
◆ Large variable filling range: 0.4-0.8;
◆ The liquid can be added in a wide range, with the maximum amount
up to 20%;
◆ Low power consumption, 60% lower than ordinary horizontal screw
belt mixer;
◆ Wide range of application, according to the needs of users to
adopt carbon steel, semi-stainless steel, stainless steel,
especially suitable for mixed production of materials.
The working principle of Fair Twin shaft mixer
The horizontal cylinder body is equipped with a biaxial rotating
reverse pulp blade.
It circulates and turns the material at a certain angle to make the
material quickly mixed evenly.
The discharging form is generally pneumatic (manual) flap valve, no
material accumulation and mixing dead Angle phenomenon;
The standard type can be divided into a big door and a small door.
The big door can be opened to the side of the tube side, Quick and
clean discharge, less residue
Fier twin shaft mixer maintenance
1. Full load startup is not allowed, and the loading quantity is
strictly controlled within 0.4-0.6. If the material is too heavy,
the machine will run while feeding.
2. Reducer: new oil should be replaced after the first refueling
operation for two weeks, and it can be replaced every 3-6 months in
the future. The oil stored in the reducer body should not be too
much or too little
3. Bearing: Grease is injected through grease hole once a month
4. Packing seal: In case of powder leakage in the box, please
tighten the four bolts on the gland of the packing box, subject to
leakage. Do not press too tight.
5. When replacing the chain, the red line of the sprockets on the
two axes shall be aligned horizontally and shall not be misplaced.
6. When the Fier Twin-shaft mixer is powered on, the two spindles
should be operated in accordance with the direction of the
indicated arrow on the equipment without reversing.
