Fast Speed Glass Cup UV Laser Marking Machine Water cooling 5w , UV Laser Marker RF-5W

Fast Speed Glass Cup UV Laser Marking Machine 3w 5w 10w , UV Laser Marker RF-5W (water cooling type)

1. Rhino UV laser marking machine applicaiton and working materials

UV laser marking machine can mark all kinds of glass and ceramicsa and its products like glass cup,coffe cup,juice cup etc.

It is with 3D software so it can mark on different shapes cup easily with fast speed and high precision.

It also can mark other materials, such as bamboo products, wood, paper ABS PVC epoxy resin, acrylic, leather, glass, building ceramics, rubber and so on.

It is widely used in pharmaceutical packaging, food packaging, beverage packaging, plastic, textile, leather, wood, handicrafts, electronic components, communications, clocks, glasses, printing and other industries.

2. The way to increase marking efficiency

Choose the suitable filling type

--- Arch filling: marking efficiency is the highest, sometimes there will be connection lines, uneven problems. When marking fine graphics and fonts, these problems will not occur, so bow filling is the first choice.

--- Two-way filling: Marking efficiency is second, the effect is good.

--- One-way filling: marking efficiency is the slowest, rarely used in actual processing.

--- Circle filling: It is only used for fine-marked graphics and fonts, and its efficiency is similar to that of bow-shaped padding.

--- Note: The use of bow filling can improve marking efficiency without requiring detailed effects. Two-way filling is the best choice to ensure the effect and efficiency.

Choosing the right mirror

--- The more bigger focus mirror, the more bigger focus spot. the distance between filling lines can be increased then improving the marking efficiency.

--- Note: The bigger the mirror is, the smaller the power density is. Therefore, the spacing of filling lines should be increased to ensure enough marking energy.

Choosing a high-speed galvanometer

Ordinary galvanometer, the maximum scanning speed can only reach two to three thousand millimeters per second; high-speed galvanometer, the maximum scanning speed can reach tens of thousands of millimeters per second. In addition, when using ordinary galvanometers to mark small graphics or fonts, it is easy to deform, and the effect must be guaranteed by reducing the scanning speed.

3. After reading above advise you still don't know how to make a right decision?

Next, I'll list the detailed configuration of different parts of the marking machine.

------ Laser is the main component of marking machine, occupying 60% of the importance of the whole marking machine.

Import: IPG, Coherent, SPI, NKT, nLight, Jenoptik, JDSU, EO

Domestic: Raycus,JPT,YIPIN etc

------ Scanning galvanometer is the second key component of marking machine: the selection of galvanometer directly affects the marking effect in the later period. Whether the distortion of graphics will occur temperature drift and marking speed directly depends on the selection of galvanometer. The high-speed scanning galvanometer can reach 12,000 mm/s and the low-speed scanning galvanometer can generally reach the maximum of 2000-4,000 mm/s.

------ Computer configuration is also very important: this shouldn't have to be explained.

Our laser marking machine can be divided into: desktop marking machine ,portable marking machine, co2 laser marking machine, fiber laser marking machine etc

4. Now please check our machine detail specifications

5. Rhino UV laser marking machine optional parts:

1.Rotary 

2.2D &3D table

3.Fixture

4.Computer

5.Air cleaner 

6.3W uv laser source /10w uv laser source 

7.Air cooling type UV source 

6. Marking samples

• Lifetime maintenance free of charge.
• Free training course at our plant.
• 24 hours on line service each day, free technical support.
• Machine has been adjusted before delivery