Home Companies Wisdtech Technology Co.,Limited

MP5981GLU-C00E Integrated Circuits ICs 16V 50A 1.1m RDS(ON) Hot-Swap Intelli-Fuse Solution

Wisdtech Technology Co.,Limited

Contact Us

[China] country

Trade Verify

Address: Room 1205-1207, Nanguang building, Huafu Road, Futian District, Shenzhen, Guangdong, China

Contact name:Tao

Inquir Now

Wisdtech Technology Co.,Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

MP5981GLU-C00E Integrated Circuits ICs 16V 50A 1.1m RDS(ON) Hot-Swap Intelli-Fuse Solution

Country/Region china
City & Province shenzhen guangdong
Categories Electronics Agents
InquireNow

Product Details

MP5981GLU-C00E 16V 50A 1.1m RDS(ON) Hot-Swap Intelli-Fuse Solution

 

Product AttributeAttribute Value
Manufacturer:MPS
Product Category:integrated controller and switch
RoHS:Details
Mounting Style:SMD/SMT
Package / Case:Standard
Packaging:Standard
Brand:MPS
Moisture Sensitive:Yes
Product Type:integrated controller and switch
Subcategory:IIntegrated Circuits ICs
Unit Weight:-oz

 

 

The MP5981 is a monolithic, integrated
controller and switch that contains a high-side
MOSFET and other circuitries that enable it to
work in standalone operation or to be controlled
by a hot-swap controller. The MP5981 drives up
to 50A of continuous current per device at room
temperature. With air flow, the continuous
current can reach 60A.
The MP5981 limits the inrush current to the
load when a circuit card is inserted into a live
backplane power source, thereby limiting the
backplane’s voltage drop. The MP5981 limits
the internal MOSFET current by controlling the
gate voltage through the current limit reference
input and soft-start ramp.
The MP5981 offers many features to simplify
system design. It provides an integrated current
mirror to monitor the output current and on-die
temperature sensing, eliminating the need for
an external current-sense power resistor, power
MOSFET, and thermal sense device.
The MP5981 detects the power FET gate,
source, and drain short conditions. It can also
provide feedback to the hot-swap controller via
the fault reporting output (GOK). The MP5981
can be paralleled for higher current applications.
All devices in parallel actively share current
during soft start.
The MP5981 is available in an LGA-32
(5mmx5mm) package.

FEATURES
• 4V to 16V Operating Input Range
• Maximum 50A Output Current
• Supports 60A of Output Current with Air
Flow
• Integrated Switch with 1.1mΩ RDS(ON)
• Built-In MOSFET Driver
• 3.0V LDO Output
• Integrated Current Sensing with Sense
Output
• Separate Current-Sensing Output Used to
Program Over-Current Value
• Built-In Insertion Delay
• Adjustable Soft Start (SS)
• Output Short-Circuit Protection (SCP)
• Over-Temperature Protection (OTP)
• Built-In Fuse Health Reporting
• Fault Signal Output
• Parallel Operation for High-Current
Applications
• Integrated Intelli-Fuse Temperature Sense
• Output Voltage Power-Down Control
• Available in an LGA-32 (5mmx5mm)
Package

APPLICATIONS
• Hot Swap
• PC Cards
• Disk Drives
• Servers
• Networking

Hot Products

Pillow Block Bearings UCFL306, UCFL306-19 With Grub Screws of Cast Iron Pillow Blocks Types ...
QS34X2245Q3G8 QUICKSWITCH HIGH-SPEED CMOSQUICKSWITCH 32-BITMULTIWIDT BUS SWITCHES
PCA9575PW2 Interface - I/O Expanders I2C Bus/ SMBus Level Translating 28-Pin Product Attribute ...
LMH2832IRHAT RF Amplifier 1.1GHz, Dual Gain Amp Product Attribute Attribute Value Manufacturer: ...
OPA2836IRMCR High Speed Operational Amplifiers Dual Lo Pwr RRO Neg Rail in VFB Op Amp Product ...
PC16552DV UART Interface IC Obsolete, LTB expires Nov 6, 2018 Product Attribute Attribute Value ...