Active Member
|
[China]
Address: Room E216, Chuangyi Park, Fuqian Road, Guanlan Zhangge, Longhua District, Shenzhen, China
Contact name:Zhou
Lenolink Telecommunication Co.,Ltd |
|
|
2G 3G 4G signal repeater 20dBm 70dB gain coverage 500 to 1000sqm with LCD displayer
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.
LC20K-GDWL multi system repeater is to support any mobile systems to help end users
to improve mobile signals for better signal coverage. It is
designed to support coverage area up to 500~1000 square meters with
proper engineering. Below are the main features:
Specification:
| Specifications: | ||||
| Parameters | Uplink | Downlink | ||
| Frequency Range | LTE800 (Band 20) | 832 ~ 862MHz | 791 ~ 821MHz | |
| GSM&EGSM (Band 8) | 880 ~ 915MHz | 925 ~ 960MHz | ||
| DCS (Band 3) | 1710 ~ 1785MHz | 1805 ~ 1880MHz | ||
| WCDMA (Band 1) | 1920 ~ 1980MHz | 2110 ~ 2170MHz | ||
| LTE2600 (Band 7) | 2500~2570MHz | 2620 ~ 2690MHz | ||
| Operation Bandwidth (-3dB) | Wide Band | |||
| Maximum Gain | JUP-15-FB | ≥65dB | ≥65dB | |
| JUP-20-FB | ≥65dB | ≥70dB | ||
| JUP-23-FB | ≥70dB | ≥70dB | ||
| JUP-27-FB | ≥70dB | ≥75dB | ||
| Output Power | JUP-15-FB | ≥12dBm | ≥15dBm | |
| JUP-20-FB | ≥15dBm | ≥20dBm | ||
| JUP-23-FB | ≥17dBm | ≥23dBm | ||
| JUP-27-FB | ≥20dBm | ≥27dBm | ||
| MGC (Manual Gain Control) | 31dB range/1dB step | |||
| AGC (Automatic Gain Control) | ≧25dB | |||
| Spurious Emission | 9KHz~1GHz | ≦ -36dBm | ||
| 1GHz~12.75GHz | ≦ -30dBm | |||
| Noise Figure | ≤ 6dB | |||
| VSWR | ≦2.0 | |||
| Group Delay | ≤1μs | |||
| LED Alarm | Power LED | DC ON/OFF | ||
| System LED | Alarm Red when ALC control over 15dB | |||
| RF Connector | N-Female | |||
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down
link to adjust the gain value for proper coverage during
installation or maintenance.
3. To maintain safe and specific output signal levels and give
alarms on self-oscillation, the repeater has built-in AGC and ALC
circuits, which can automatically control the gain of the repeater
depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and
downlink to avoid serious interference to network effectively when
the repeater is in deep self-oscillation or very strong input
power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.
Installation:
Our factory:
