Active Member
|
[China]
Address: Room 607,East block,NanFang Building,SangBu Industrial,FuTian,Shenzhen,Guongdong,China
Contact name:Susan Chen
Shenzhen ReachFar Technology Co., Ltd.汇智科技有限公司 |
|
|
Product View:
put a GSM SIM card into the alarm.
open the back cover and insert a GSM sim card in the right direction as instruction,the lights flash 1 time, mean the power
supply has been switched on, the light will flash 3 times about after 30 seconds,that's mean ready for work.Then close the
alarm box with screw.
Install 
the alarm
It is easy to install.Just connect the alarm interface with vehicle's interface, it is OK.
alarm setting
In order to guarantee the GSM alarm safety and personal privacy, the alarm has password, the default password is 123. Please change password timely.
Change Password: send existing passoword(+)T(+)new password . For example:123T456 will change the password as 456.
Switch language
Send passwored(+)LAG2 change the language to English.
Send password(+) LAG1 change the language to Chinese.
Send passwored(+)LAG3 change the language to Russian.
For example:if you had changed the password as 456,then send 456LAG2 to change the language to English.
Turn on the GSM alarm function: password(+)AON, it will trun on and banding the controller number.
Turn off the GSM alarm function: password(+)AOFF will turn off the GSM alert function,then there are no SMS alert when you car was moved,
Turn on listening function:send SMS password(+)HM1(2,3,4,5) to pre-program the control number. Use the 5 pre-program number call the alarm,it will answer your call automatically then you can listen the sound around your vehicle.
Remote controller function
Alarm:When the vehicle was shake,the alarm will lock the vehicle, same time send SMS to the controller number: you vehicle
have abnormal vibration, please check timely.It will no longer alarm within 5 minutes shock again, only lock vehicle.
Cut-off alert:When some one cut-off the alarm wire,the alarm will send: The alarm system has been without electricity, please check timely!
Low battery alert:When the build-in battery power is low,the alarm will send :Your alarm battery is too low, please charge timely.
Remote location:
Send password(+)LBS, the alarm will report map link and address to the SMS sender.(please insure the SIM have GPRS data function.)
Location platform
Check IMEI:send password(+)DSP, the alarm will report IMEI and the alarm state.
Visit www.trackanywhere.org, use the IMEI number login the platform, password is 123456, please improve the user information and change your password immediately.
Send password(+)GON,the alarm will upload position and machine status data to the platform every 5 minutes.You can experience trace, electronic fences, remote alarm and emergency contacts function in the website. (Please insure the SIM have GPRS data function.)
Send password(+)GOFF stop upload the data to website.
3 alarm mode can be choose:
send password(+)MOD1 Alarm mode has been changed to: send SMS first, and then call.
send password(+)MOD2 Alarm mode has been changed to: only call.
send password(+)MOD3 Alarm mode has been changed to: Send SMS only.
Note
ü The power supply is 36V/DC to 96V/DC.
ü In order to get a better signal. Please install the GSM alarm host in a no metal position.
Accessories:
vehicle alarm host *1
(network:850/900/1800/1900)
Loudspeaker *1
Remote controller *2
User Guide *1
