|
[China]
Trade Verify
Address: RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact name:Dannie
Shenzhen Meigaolan Electronic Instrument Co. Ltd |
|
Verified Suppliers
|
|
|
Keysight Agilent 8757D Scalar Network Analyzer 110 GHz Color Display
Description of Keysight Agilent 8757D
The Keysight 8757D scalar network analyzer allows you to measure insertion loss, gain, return loss, SWR, and power quickly and accurately . With high-performance detectors and directional bridges, and a companion Keysight source and printer, this analyzer becomes the basis of a complete measurement system with superb performance.
Setup time is reduced by external disk save/recall, and measurement data can be sent directly to a printer while you proceed to the next measurement.
You can configure your system using a Keysight PSG signal generator with ramp sweep capability. The dynamic range can be extended from 75 dB to 83 dB using the PSG's high power option.
Overview and Features of 8757D Scalar Network Analyzer 110 GHz
Display modes
All analyzer display channels can display any one of the detector inputs or any ratio combination of detector inputs.
Log magnitude
dBm: single channel power measurement dB: relative power measurement (ratio or relative to trace memory)
SWR
Relative measurements (normalized or ratio measurements) can be displayed in SWR. Channels 1 and 2 only: 401 points or fewer
AUX voltage
The rear panel BNC input ADC IN can be measured and displayed in volts (–10 to +10 volts). Typical maximum error is 60 mV. Color settings Up to 8 operator-selectable colors are available for LCD attributes, such as the grid, measurement traces, and labels
| 001 | Fourth Detector Input |
| 002 | Internal Power Calibrator |
| 012 | add fourth detector and internal power calibrator |
| 0Q8 | Factory Delivered Service Training |
| 1BN | Military Standard 45662A Calibration Certification |
| 1BP | Military Standard 45662A Calibration with Test Data |
| 802 | HP 9122C disk drive and GPIB cable |
| 85022A | System Cable Kit |
| 908 | Rack Flange Kit for Use without Handles |
| 910 | Additional operating and service manual |
| 913 | Rack Mount Flange Kit |
| E02 | Scalar Network Analysis System |
| LCD | LCD panel |
| UK6 | Commercial calibration with test results data |
| W30 | 3 Years Return for Repair Service |
| W50 | 5 Year Customer Return Repair Service |
| W52 | 5 Years Return for Calibration Service |
FAQ:
1. Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
