|
[China]
Trade Verify
Address: Room 1406，Building5，No. 9, Gucheng South Street, Shijingshan District, Beijing, China
Contact name:Martin
Beijing Hengtai Tech Co., Ltd |
|
Verified Suppliers
|
|
|
Combination Wrench Non Magnetic Titanium Tools Kit For Mri Scan
Quick Detail:
A. Mechanical properties
Tensile strength: OB 827-1098 Mp
M state plate and rod :895Mp
Yield strength: O S758-1034MP (non-proportional elongation
strength)(including R, Y and M states)
B. hardness: HRC28-35(including R, Y, M three states)
C. Specific gravity: 4.51 (mean of titanium and alloy) ( Standard
Tc4: 4.424g/cm3)
D. high temperature elongation: 8-12% (higher temperature
elongation)
E. magnetic susceptibility :3.15+0.02cm. G /s
F. resistivity: 157-1719/cm Electrical conductivity :0.637~0.585
S/m
G. Permeability :1.0002
Application:
Titanium non-magnetic tools meet the stringent requirements of the
aerospace industry and are used in
aircraft research, design, development, maintenance and performance
testing.
It provides a safer option for technical engineers when working on
clinical open and obturator MRI
machines. In the MRI room, equipment maintenance must be performed
using MRI non-magnetic hand tools to
avoid unnecessary risks. Therefore, it is essential to use Titanium
non-magnetic tools in MRI site.
MRI Machine install, deinstall, repair for MRI engineers.
Specification:
| COD | Product Name | Size |
| TI.FC.FO-18*200 | Flat chisel | 18*200 |
| TI.AW-6" | Adjustable wrench | 6" |
| TI.COP-8" | Combination plier | 8" |
| TI.MP-8" | Slip joint plier | 8" |
| TI.HRNP-6" | Long nose plier | 6" |
| TI.SPHS-2*150 | Phillips screwdriver | #2*150 |
| TI.SPHS-3*200 | Phillips screwdriver | #3*200 |
| TI.SSH-6*150 | Flat screwdriver | 6*150 |
| TI.SSH-8*200 | Flat screwdriver | 8*200 |
| TI.1/2”D6PS-8 | Socket 6 point 1/2” drive | 8mm |
| TI.1/2”D6PS-10 | Socket 6 point 1/2” drive | 10mm |
| TI.1/2”D6PS-12 | Socket 6 point 1/2” drive | 12mm |
| TI.1/2”D6PS-14 | Socket 6 point 1/2” drive | 14mm |
| TI.1/2”D6PS-17 | Socket 6 point 1/2” drive | 17mm |
| TI.STD-1/2"*250 | Sliding tee | 1/2"*250mm |
| TI.BHEH-1 | Ball pein hammer | 1LB |
| TI.CW-8 | Combination wrench | 8mm |
| TI.CW-10 | Combination wrench | 10mm |
| TI.CW-12 | Combination wrench | 12mm |
| TI.CW-14 | Combination wrench | 14mm |
| TI.CW-17 | Combination wrench | 17mm |
| TI.HK.M-4 | Hex key | 4mm |
| TI.HK.M-5 | Hex key | 5mm |
| TI.HK.M-6 | Hex key | 6mm |
| TI.HK.M-8 | Hex key | 8mm |
| TI.HK.M-10 | Hex key | 10mm |
3.Advantage
A.Outstanding Corrosion Resistance
B.Anti-magnetic behavior for use in strong magnetic fields (e.g.,
magnetic resonance imagery)
C.High specific strength High elastic energy consumption capacity
D.The weight is much lighter than stainless steel
E.High thermal stress
F.Good bio-compatibility Good bio-compatibility
