Smart Telescopic Tribunes High Density Polyethylene With Blow Moulded Constructed Seat

Smart Telescopic Tribunes with Blow Moulded Constructed Seat

Description

Burgeon telescopic tribunes is one of the most popular seats that is available from our diverse range of seating. This seat has the capabilitiy to provide numerous differing applications, starting with an economical nose mounting with a folding back, or it can be installed with a folding mechanism and a tip - up seat. Telescopic tribunes delivers a divarsity that is unparalleled within our flexible seating rage. Fixed melody and melody with folding mechanism are available.

Specification

• Row depth : 850 mm - 900mm or customized.
• C/C width : 460mm - 500mm
• Seat center : 460mm - 500mm
• Row riser height : 300mm - 350mm or customized
• Seat number : optional
• Frame material : steel with powder coating
• Seat color : please refer to Burgeon color swatch
• Operative method : manual or power operation
• Decking : anti - slip plywood
• Optional color : refer to pantone color swatch
• Test Report : EN 13200-5

Platfrom Type

1) Recessed Unit: This telescopic tribunes system utilize a pocket in the wall to house the bleacher when closed. The ends may or may not be exposed and the bleacher is hidden from view typically under a balcony or niche. Recessed bleachers are outfitted with upper and lower tracking guides, removable end rails, and can accommodate custom transition step to the balcony when required.

2) Wall Attached Unit: The seating system are supplied from 3 to 30 tiers. It is extremely adaptable and efficiently recover floor space, allowing you to easily get the most out of your facilities at all times.

3) Freestanding Unit: For some buildings, there are permanent rear large columns or weak loading rear wall, the freestanding unit is the ideal solution. Freestanding Units are outfitted with end rails and rear rails for safety reason. The rear panels or rear curtains are available upon request.

Accessories

1) Variable Row 1 (VR1): Provide first row recoverable modular seating units to be utilized for both wheelchairs and able-bodied persons. Each VR1 unit shall have a system for easy deployment if wheelchair or team seating access is needed. the system shall lock the bleacher seats into position when fully opened.

2) End Panel: Provide closure end panels for stack position at each exposed bank ends. End panels shall be constructed of plywood or melamine.

3) Top Seat Flush Filler: Provide at top seat level a flush filler board mounted between top seat and rear wall. Flush filler board shall be constructed of 19mm thick Deco-plywood.

Application