Active Member
|
[China]
Address: 2013 Creative Maker Park, 108th Lijia Road, Longgang District, Shenzhen, China
Contact name:Jane
Burgeon Sports Facilities Co., Limited |
|
|
Teleacopic/ Retractable Bleacher Seating for Multifunctional Sport Court
Description
Burgeon retractable seating system is quiet to operate and strong in its design. Every parts including the slant frame engineering geometry has been designed to enhance the system's operation strength and stability. And it is widly used for multifunctional sport hall, gym, stadium and other sport facilities.
Specification
| Row Depth | 650 mm- 850 mm/Customized |
| C/C Width | 460mm |
| Backrest | Available Upon Request |
| Row Riser height | 250mm-300 mm/Customized |
| Stair width | 920mm/1000mm/Customized |
| Seat centers | 460mm |
| Material of the frame | Steel with powder coating decking: anti-slip plywood deck |
| Material of the seat | HDPE |
| Standard color | under structure: black, grey, blue color or customized seat color: please refer to Burgeon color swatch |
| Optional color | refer to pantone color swatch |
| Operative method | Manual or Power Operation |
| Test Report | EN 13200-5 |
Options
a. Seat Number
b. Contrasting color end panels
c. VIP Programme : available in your color choice
Platform Type
1) Travelling Unit
It is a hybrid of recessed and portable units. Travelling units use integral power to drive the entire bank from one setup position to another. Set-up time is greatly reduced compared to individual portable sections.
2) Portable Dolly
It is the most economical for large number of small portable sections. Two dollies are required to move one section.
3) Integral Dolly
Ideal for high tier units, the integral lifting mechanism allows you to move multiple portable sections without additional equipment. Four mechanical screw jacks lift the unit and 12 large wheels allow for effortless transportation of your bleacher.
4) Burgeon retractable seating can be customized to your project site.
Operation Way
1) Manual Operation
Operating Handles: Provide and install manual operating handles constructed of 19mm OD steel tubing. Handles to engage pull-bar installed at the first tier.
2) Power Operation
A. Integrated Power: Furnish and install an integral automatic electro-mechanical powered frame propulsion system, to open and close telescopic seating. Integral Power and Control System shall be CE stamped and tested.
B. Motion Monitor: Provide flashing light with self-contained warning horn mounted to the telescopic seating for audio and visual warning during integral power operation.
C. Electrical: Seating Manufacturer shall provide all wiring within seating bank including remote control device.
D. Electrical Switchboard and Enclosure: Seating Manufacturer shall provide a complete switchboard and enclosure with each seating bank. The location of the enclosure, and the specific electrical requirements will be detailed on the submittal drawings
