Active Member
|
[China]
Address: No33 Wangshan Road, Green Island Economic Development Zone, Shijiazhuang, China
Contact name:
Hebei Kaixiang Electrical Technology Co., Ltd |
|
Intelligent/Full Automatic Three Phase 50kw Dummy Load Bank
Product Description
1.our load bank an accurately test output power and load capacity
with all kinds of generators.
2.System consists of testing/control and load bank, mainly includes
AC load bank, data capture system, auto load/unload control system,
heat dissipation device, assist control and PC software.
3.User can control load bank through local control panel, also
through software
Technical Parameters
| Rating Voltage/Frequency | 400VAC/50Hz, 3 phase 4 wire, |
| Rated Load Power | Resistive load: 50kW |
| Installed Capacity | Resistive load: 50kW |
| Load Step | 1,2,2,5,10,10,20kW, min step load: 1kW |
| PF(Power Factor) | 1 |
| Load Tolerance (each step) | ±5% |
| Load Tolerance(overall) | ±3% |
| Display Precision | 0.5 class |
| Control Power | 220VAC/50Hz, single phase |
| Wire Connection | Load power supply input——terminal block |
| Insulation | F |
| Duty Cycle | Continuous |
| Casing Dimensions and Cooling | about 570*530*710mm (length*width*height) Forced air cooling,Horizontal inlet air,Horizontal outlet air |
| Weight | About 75kgs/set |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Casing Color | Grey(RAL7035) |
| Ambient Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Altitude | ≤1500 meter |
| Atmospheric Pressure | 86～106kPa |
| Contactor | Schneider |
| Fuse | DELIXI |
| MCU | INFINEON |
| Data processing software | Kaixiang(self-developed) |
| Alloy Resistance | Kaixiang(self-developed) |
Product Advantage
load element using excellent anti-corrosion materials; waterproof
insulation container packaging, suitable for adverse environment
such as ocean. Internal layout is reasonable, air channel is clear,
rapid heat emission, and satisfy continuous working need.
Application
1.Manufacturers of standby power generators commonly use load banks
to test and tune newly assembled units
2.generator has been set up in a test cell within the factory, a
test engineer uses the load bank to apply a discrete, selectable
electrical load to the generator and measure the response stability
and endurance.
3.During this process, the test engineer calibrates and adjusts the
generator performance to ensure it meets the intended product
specifications and tolerances.
