Active Member
|
[China]
Address: Room 410 Xinlong Building, Baishilong Community, Minzhi Street, Longhua District, Shenzhen,China
Contact name:Justin
Shenzhen Samtion Chemical Co., Ltd |
|
|
Sabic NoryL PO2323 resin is Noryl PO2323 is an unfilled, medium heat, developmental material. This grade is the direct translation of USA PX0844.
Property
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Taber Abrasion, CS-17, 1 kg | 80 | mg/1000cy | SABIC Method |
| Tensile Stress, yield, 50 mm/min | 40 | MPa | ISO 527 |
| Tensile Stress, break, 50 mm/min | 40 | MPa | ISO 527 |
| Tensile Strain, yield, 50 mm/min | 3 | % | ISO 527 |
| Tensile Strain, break, 50 mm/min | 30 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2000 | MPa | ISO 527 |
| Flexural Stress, yield, 2 mm/min | 65 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 2100 | MPa | ISO 178 |
| Hardness, H358/30 | 90 | MPa | ISO 2039-1 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, notched 80*10*4 +23°C | 15 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -30°C | 10 | kJ/m² | ISO 180/1A |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 15 | kJ/m² | ISO 179/1eA |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 10 | kJ/m² | ISO 179/1eA |
| THERMAL | Value | Unit | Standard |
| CTE, 23°C to 80°C, flow | 8.E-05 | 1/°C | ISO 11359-2 |
| CTE, 23°C to 80°C, xflow | 8.E-05 | 1/°C | ISO 11359-2 |
| Ball Pressure Test, 75°C +/- 2°C | PASSES | - | IEC 60695-10-2 |
| Vicat Softening Temp, Rate B/50 | 125 | °C | ISO 306 |
| Vicat Softening Temp, Rate B/120 | 130 | °C | ISO 306 |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 115 | °C | ISO 75/Be |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 100 | °C | ISO 75/Ae |
| PHYSICAL | Value | Unit | Standard |
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Volume Rate, MVR at 280°C/5.0 kg | 12 | cm³/10 min | ISO 1133 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 1.E+15 | Ohm-cm | IEC 60093 |
| Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 |
| Dielectric Strength, in oil, 3.2 mm | 18 | kV/mm | IEC 60243-1 |
| Relative Permittivity, 50/60 Hz | 2.3 | - | IEC 60250 |
| Relative Permittivity, 1 MHz | 2.3 | - | IEC 60250 |
| Dissipation Factor, 50/60 Hz | 0.0002 | - | IEC 60250 |
| Dissipation Factor, 1 MHz | 0.001 | - | IEC 60250 |
| Source GMD, last updated:07/13/1999 | |||
| Parameter | |||
| Injection Molding | Value | Unit | |
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 2 - 3 | hrs | |
| Melt Temperature | 280 - 300 | °C | |
| Nozzle Temperature | 270 - 290 | °C | |
| Front - Zone 3 Temperature | 280 - 300 | °C | |
| Middle - Zone 2 Temperature | 260 - 280 | °C | |
| Rear - Zone 1 Temperature | 240 - 260 | °C | |
| Hopper Temperature | 60 - 80 | °C | |
| Mold Temperature | 80 - 100 | °C | |
| Source GMD, last updated:07/13/1999 | |||
Other related products we recommend:
Drinking water / food grade:731,731S,GFN10F,GFN20F,GFN30F,GFN1520V,GFN1630V(Color requirements)
Unreinforce and flame retardant: 0150B,N190X,PX9406P,SE100X
Reinforce and flame retardant: SE1GFN1,SE1GFN2,SE1GFN3,HS2000X
For more information please see below | |
 | Sabic Noryl PO2323.pdf |
Get The Latest Quotation 5000 kinds of products 1000 tons of spot inventory First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
|
Sabic Noryl Resin Application
Sabic Noryl PPO is modified polyphenylene oxide (PPO) resins produced by the Sabic company. It is known for its excellent balance of properties, including high heat resistance, dimensional stability, and chemical resistance.
Noryl PPO resins are produced by blending PPO with other materials,
such as polystyrene or polyamide.Sabic Noryl PPO include: |
| |
| 3. Chemical resistance: Sabic Noryl PPO has good chemical
resistance. It is commonly used in automotive and electrical
applications where chemical resistance is important. 4. Good electrical properties: Sabic Noryl PPO has good electrical properties. This makes it suitable for use in electrical and electronic applications, such as connectors and switches. 5. Ease of processing: Sabic Noryl PPO is easy to process and can be easily molded into complex shapes with thin walls. | ||
Related products
Different Noryl Resin have different applications
We recommend more different kinds of PPO categories for your reference:
Company Profile
The Shenzhen Samtion Chemical Co., Ltd
Focus on the export and production support of engineering plastics
and special modified materials
15 Years Experience
We are a leading supplier of top end engineering plastics raw
materials.
The company is formed by a group of senior teams engaged in the
sales and production of engineering plastic materials for over 15
years.
More Than 1,000 Customers
Up to now, we have provided
high-quality products and services to more than 1,000 customers in
various industries, including: electronics and electrical
appliances, medical, food, automotive electronics, optoelectronic
communications, photovoltaic new energy, water
treatment,transportation and other industries.
Quality Assurance
Every batch of our products is subject to strict quality inspection
to ensure the original supply. All products have MSDS, ROHS, SGS,
REACH,EU, UL, COC / COA certificates!
FAQ
1. About quality assurance
We provide all product test authoritative reports required by
customers, and all products have original factory shipment
certificates and qualifications. We will take full responsibility
for any customer complaints caused by our product quality problems.
2. About the shipping method
We can use land transportation, sea transportation, and air
transportation according to customer requirements; we can also
choose logistics suppliers according to customer requirements.
3. About the payment method
T/T, Western Union, PayPal, LC, etc. are all acceptable.
4. About MOQ:
The minimum quantity of an order is dependent on different types of
materials, please ask our sales representatives
5. About quotation:
You can contact oursales representatives for a quotation at any
time, we promise to reply within 7-24 hours
6. About technical support
We have a large technical support team, which can provide technical
support including material selection, color matching service,mold
consultation, product production service, etc. according to the
situation of the customer's project.
