|
[China]
Trade Verify
Address: Room 901B, Block A, Endeavor Valley Building, Baoan District, Shenzhen
Contact name:Anna Zhang
Shenzhen Benia New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
| Solvay PSU Udel Resin Series | Udel P-1700 HC |
| Udel P-1700 CL 2611 | |
| Udel P-1700 NT 06 | |
| Udel P-1700 NT 11 | |
| Udel P-1700 NT 15 | |
| Udel P-1700 BK 937 | |
| Udel P-1700 WH 6417 | |
| Udel P-1700 WH 7407 | |
| Udel P-1700 NT LCD | |
| Udel P-1710 | |
| Udel P- 1710 NT 15 | |
| Udel P-1720 | |
| Udel P-3700 HC | |
| Udel P-3500 NT11 / Udel P-3500 NT11 / Udel P-3500 NT LCD | |
| Udel GF-120 NT 20 | |
| Udel GF-120 BK 937 | |
| Udel GF-120 GY 1234 | |
| Udel GF-110 NT LE | |
| Udel GF-110 BK 937 | |
| Udel GF-110 GY 8057 | |
| Udel GF-130 NT | |
| Udel GF-130 BK 937 |
DESCRIPTION
PSU Udel P-1710 NT 15 polysulfone (PSU) is a tough, rigid,
high-strength thermoplastics suitable for continuous use up to
300°F (149°C). It is resistant to oxidation and hydrolysis and
withstand prolonged exposure to high temperatures and repeated
sterilization. Udel® P-1710 polysulfone is highly resistant to
mineral acids, alkali and salt solutions. Resistance to detergents
and hydrocarbon oils is good, but the resin may be attacked by
polar solvents such as ketones, chlorinated hydrocarbons and
aromatic hydrocarbons.
These resins are also highly resistant to degradation by gamma or
electron beam radiation. Electrical properties of Udel® P-1710
polysulfones are stable over a wide temperature range and after
immersion in water or exposure to high humidity.
The resins comply with CFR 177.1655 and may be used in articles
intended for repeated use in contact with foods. Additionally, they
are approved by the NSF, by the Department of Agriculture for
contact with meat and poultry and by the 3-A Sanitary Standards of
the Dairy Association.
Transparent Plastic With High Strength & Rigidity
Udel® PSU (polysulfone) is a rigid, high-strength, semi-tough,
transparent plastic that offers higher heat resistance and better
hydrolytic stability than polycarbonate. It retains its good
mechanical properties when exposed to steam and other sterilization
techniques.
Udel® PSU polymers are particularly well suited for the fabrication
of porous hollow fiber and flat sheet membranes using a
solvent-based process. These high molecular weight polymers are
used in a variety of membrane filtration applications, such as
renal dialysis, water treatment, bio-processing, food and beverage
processing, and industrial gas separation.
Why Udel® PSU?
*High heat deflection temperature, 174°C (345°F)
*Combustion resistance
*Transparency
*Approved for food contact and potable water
*Low creep
*Excellent thermal stability
*Well suited for the fabrication of hollow fiber and flat sheet
membranes
*Stability at pH levels from 2-13
*Excellent resistance to caustic and good resistance to chlorine
*Low levels of extractible and insoluble materials
*May be sterilized using steam, ethylene oxide, and e-beam
radiation
*High toughness and strength
*Good environmental stress cracking resistance
Feel free to contact us with any questions.
Shenzhen Benia New Material Technology Co.Ltd., located in Shenzhen,China, is a professional supplier of high-temperature engineering plastics and special modified materials. Benia is committed to introducing, transforming and serving quality customers of thousands materials and advanced scientific and technological achievements around the world. At present, our customers cover aerospace, electronics and electrical, medical supplies and equipments, photoelectric communication, water treatment, transports, consumer products and other industries.
Benia provides not only customers with high quality and high performance products to meet the changing needs of customers, but also the abundant technica resources of various chemical plant to provide customers in the process of product development solutions. The client will get the high efficiency, high standard technical support and dedicated and fast professional services from Benia material selection, mould design, trial production, even all stages of official product production.
1. Strong cooperators: Benia have maintained long-term close cooperation with many international famous chemical companies for many years such as SABIC, SOLVAY, BASF,VICTREX, DAIKIN, DUPONT, , HANWHA, etc.
2. Stable supply chain: Benia has a comprehensive production supply chain, and is able to steadily and continuously supply all products and provide services with comprehensive solutions and production applications.
3. Logistics: Benia have long-term and stable cooperative logistics companies that can safely reach around the world while ensuring product quality. We also accept customers to provide their own logistics providers.
4. Small order accepted: Low MOQ accepted. 5KG are available for certain products.
5. Technical support: Benia can customize the marterials according to the customer needs of the product color matching and function.
Q1: What is your shipping method?
A1: DHL/UPS/TNT/Fedex and other air shipments and sea shipments are
all workable.
We could do any shipment you wanted which depends on your purchase
quantity.
Q2:How long does the delievery time take?
A2:In General, the delivery date will be 5-7 working days for
normal quantity. Please leave us a message further if a large
order.
Q3:Do you have any discount?
A3:We can provide a lower price depending on the amount of products
you purchase.
Q4:How about product quality for each batch?
A4:We have the corresponding COA for each product to guarantee the
original factory production.
Q5:When can I get the quote price?
A5:After received your request, we will response ASAP (usually with
in 12 hours)
