Home Companies Briture Co., Ltd.

100% Biodegradable And Compostable Polylactic Acid Fiber For Textiles

Briture Co., Ltd.

Contact Us

Trade Verify

Address: Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.

Contact name:Linda Qiang

Inquir Now

Briture Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

100% Biodegradable And Compostable Polylactic Acid Fiber For Textiles

City & Province hefei
Categories Other Fiber
InquireNow

Product Details

100% Biodegradable And Compostable Polylactic Acid Fiber For Textiles

 

Product Description:

The raw material of polylactic acid fiber (PLA) is lactic acid, which is made from corn starch, so the fiber is also called corn fiber. With good biodegradability, PLA fiber can be completely decomposed into CO2 and H2O in nature after going out of use. Our PLA staple fibers are produced by high quality PLA section to replace the polyester fiber and the cotton fiber and are usually applied for the textiles, the hygiene material, filling material and so on to improve environment.

 

 

Features & Benefits:

1. Anti-Bacteria

2. Eco-Friendly

3. 100% Biodegradable & Compostable

 

Specification:
Appearance
white
Density (g/cm3)
1.25
Melting Point (℃)
130-175
Strength (g/d)
2.0-6.0
Moisture regain (%)
0.4-0.6
Elastic recovery percentage of elongation (%)
93
Heat output (MJ/KG)
19
limiting oxygen index(%)
26-35
Anti-UV
Good
Index of refraction
1.35-1.45

 

Packing: About 150kgs each bale.

 

Certification:

Hot Products

White Powder B-VMCH Similar to VMCH of Dow Chemical For Primer And Inks For Golden And Silver Card ...
Thermoplastic solid acrylic resin BA-725 (Be similar to DSM725, Degalan LP64/12 ) Resolvable: It is ...
White Powder Solid Alcohol Soluble Acrylic Resin For Ink And Coating Resolvable: It is soluble in ...
Thermoplastic solid acrylic resin BA-725 (Be similar to Degalan LP 64/12 ) Resolvable: It is Solid ...
White Beads Solid Acrylic Resin BA-HV For Exterior Coating And Fire-Retardant Coating Solid Acrylic ...
Softenting Point 185- 195℃ Solid Acrylic Resin BA-15 For Heat Transfer Printing Introduction: Solid ...