Home Companies Briture Co., Ltd.

0.2mm PVA Fiber Uhpc Special Synthetic Fiber High Strength Polymer Fibre For UHPC

Briture Co., Ltd.

Contact Us

Trade Verify

Address: Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.

Contact name:Linda Qiang

Inquir Now

Briture Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

0.2mm PVA Fiber Uhpc Special Synthetic Fiber High Strength Polymer Fibre For UHPC

City & Province hefei
Categories Other Fiber
InquireNow

Product Details

UHPC Special Synthetic Fibre

 

 

Product Description

UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment.

UHPC fiber products are 40 denier, monofilament PVA fibers for use in fiber reinforced concrete, stucco, shotcrete and precast. UHPC Fiber is
specifically designed for use in concrete products for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion resistance.

It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack resistance, toughening , impact resistance, fire and explosion resistance of UHPC.

It can be used in all types of concrete. Synthetic fibers help the concrete at early ages, which is especially beneficial where stripping time and handling is important.

 

Applications

  1. Building decoration exterior wall
  2. UHPC carved artwork
  3. Cement Flower pot products
  4. Municipal road bricks etc.

Benefits

  • No rusty
  • Excellent dispersity
  • Self compact
  • Light and artistic
  • Colourfull
  • Reduces the formation of plastic shrinkage cracking in concrete.
  • Improves impact, shatter and abrasion resistance of concrete.
  • Enhances durability and toughness of concrete
  • Prevent water seepage and prolong the life of the building.
  • Cost saving, easier to use,to disperse and safe to handle.
  • Can be used in highly corrosive circumstance.

Technical Information

 

Fibre DimensionD:0.2mm; L:6/12mm
Minimum Tensile Strength>950MPa
Modulus>12GPa
Elongation at break≤30%
Density1.4g/cm3
Acid &Alkali ResistanceExcellent
Moisture Content≤0.1%
AppearanceTransparent monofilament

 

 

Guidelines for use
Dosage: the usual dosing amount is 5.0-50.0kg /m3( the corresponding volume dosing amount is 0.4-4.0%).

Length: The length of UHPC should be 6-12mm. According to different thicknedd of components.

Stirring: After mixing the UHPC powder and water to make the slurry evenly, add the fibers, and then stir for 2 to 4 minutes, subject to the
uniform dispersion of the fibers.

Curing: The construction and curing process of UHPC after adding fiber is exactly the same as the system without fiber


Packing
10 or 20kg/big bag, 700kg/pallet , 7000kg /20 ‘container , 14000kg / 40 ‘container

 

 

 

Hot Products

Chlorinated rubber CR 30 Features Chlorinated rubber CR30 is wear resistance, weather resistance, ...
Chlorinated rubber CR-10 Features CR-10 chlorinated rubber has some obvious features, such as wear ...
German Pergut S5 S10 S20 S40 Chlorinated Rubber resin Cr5 Cr10 Cr20 Cr40 for Paint and Coating ...
Industrial Grade White or pale yellow powder Pergut S20 Chlorinated Rubber Cr30 for Coating Product ...
Product Description Chlorinated rubber is White or pale yellow powder. Specification Product name ...
Product Description Chlorinated rubber CR10 is White or pale yellow powder, it is similar to Pergut ...