Home Companies Shanghai kangquan Valve Co. Ltd.

Threaded Bore Suction Industrial Water Strainers Longer Style With Galvanized Steel

Active Member

Contact Us

[China]

Address: No.159 Jiugan road Sijing industrial zone Songjiang District Shanghai, China

Contact name:Steve

Shanghai kangquan Valve Co. Ltd.

Threaded Bore Suction Industrial Water Strainers Longer Style With Galvanized Steel

Country/Region china
City & Province shanghai shanghai
Categories Graters

Product Details

 

Threaded Bore Suction Strainer, Longer Style, Material by Galvanized Steel Large

 

 

2mm hole size for filtering preferably brass or stainless steel

 

Long strainer about 200mm to 300mm long.

 

the item is simple, just one screen with one thread end.

 

FEATURES
•  Iron strainers are complete with Flat Face (Series 125YF) or Raised Face (Series 250YF)
    flanges in accordance with ASME B16.1.


•  Strainer body meets applicable ASME Standard.


•  One piece cast body.


•  Strainers equipped with bolted cover flange that utilize a flat gasket seal.


•  Low pressure drop.


•  Upper and lower machined seats.


•  304 SS perforated screens are standard.


•  Drain/Blow-off connection furnished with plug as standard.


•  Generous screen area and properly proportioned straining chamber to minimize initial pressure

    drop while maximizing time between cleanings.


•  Compact end to end dimension.

 

 

Brief introduction:

 

The strainer may be used on all types of pipelines to collect granulated foreign substances and 

contaminants collected. It can improve the clearance in the medium, and prolong the life of valves 

and other equipments. It is suitable for wafer, petroleum and steam.

 

Mail part & material 

Body: gray cast iron, cast iron, ductile iron 

Filter: stainless steel 

O-ring: NBR 

 

Technical Specification

- Nominal diameter:65~500mm        

- Nominal pressure:1.0/1.6/2.5Mpa

 

 

STRAINER INSTALLATION INSTRUCTIONS
A . Ensure all machined surfaces are free of defects and that the inside of the
strainer is free of foreign objects.
B .  For horizontal pipelines, the strainer should be installed so that the drain
connection is pointed downwards.
C .  For flanged end strainers, the flange bolting should be tightened gradually in
a back and forth clockwise motion.
D .  Once installed, increase line pressure gradually and check for leakage around joints
E .  If the strainer is supplied with a start-up screen, monitor pressure drop carefully.


 

 

SIZEINCH2345681012141618
MM506580100130150200250300350400450
AINCH7.875 10 10.125 12.125 15.625 18.5 21.625 25.75 30 33.25 38.75 43.12 
MM200 254 257 308 397 470 549 654 759 846 984 1095 
BINCH5.25 6.5 7.5 13.125 15.75 18 18.5 22 28.625 30 31 
MM133 165 190 227 335 401 457 471 557 727 762 788 
CINCH2.5 10 12 14 16 18 
MM51 65 76 102 127 152 203 254 305 356 406 457 
Weightkgs131621304360901401753926271032

Hot Products

CI Sluice Gate 225 mm Dia Spigot Valve With Extension Spindle 1.5 m Length 225 mm dia Spigot valve ...
Double Disc Water Supply Gate Valve , Fire Protection Resilient Seat Gate Valve Water Supply Gate ...
Gate Valve Flange Type DN40 ~ DN 1200 Durable Resilient Seated Check Valve Characteristics: 1,the ...
DIN 30677-2 Standard Full Bore resilient seated valve Epoxy Coating A. Stem sealing Three independen...
High Pressure Resilient Seated Gate Valve DIN 3352 , JIS 10 K, EN 7005.2 Flange Resilient Seated ...
Non Rising Stem Ductile Iron Gate Valve / Mueller Resilient Wedge Gate Valve General information ...