|
[China]
Trade Verify
Address: No.2 Yun Quan Zhi Jie, Guang Yuan Dong Lu, Yue Xie Qu, Guang Zhou , China
Contact name:Lily
MHC Linkway Auto Parts Limited |
|
Verified Suppliers
|
|
|
4 Wire Front Lambda Sensor Car Engine Oxygen Sensor 89465-52370
Specifications:
| OEM No.: | 89465-52370 |
| Part Name: | Oxygen Sensor |
| Car Model: | Toyota Yaris Vios |
| Position: | Rear |
| Sample: | Available |
| Quality: | Same As Original Quality |
| Contidion: | New |
| Size: | OEM Standard |
Car Applicable Models:
| Market | Date range | Model | Frames/Options | Found in diagram |
|---|---|---|---|---|
| General | 05/2008-07/2013 | TOYOTA YARIS | NCP90,ZSP91 | 84-01: SWITCH & RELAY & COMPUTER |
| General | 08/2005-06/2011 | TOYOTA YARIS | NCP9* | 84-01: SWITCH & RELAY & COMPUTER |
| General | 08/2011- | TOYOTA YARIS | NCP13* | 84-01: SWITCH & RELAY & COMPUTER |
| General | 01/2006-08/2014 | TOYOTA YARIS | NCP91 | 84-01: SWITCH & RELAY & COMPUTER |
| General | 02/2008-06/2013 | TOYOTA VIOS | NCP92,ZSP92 | 84-01: SWITCH & RELAY & COMPUTER |
| General | 01/2006- | TOYOTA YARIS | NCP9* | 84-01: SWITCH & RELAY & COMPUTER |
| General | 02/2007-02/2014 | TOYOTA VIOS | NCP9* | 84-01: SWITCH & RELAY & COMPUTER |
What is an Oxygen Sensor ?
Functioning like a monitor, your oxygen sensor works like this: the O2 sensor tip is located inside of your exhaust pipe, the oxygen sensor detects the percentage of oxygen in the exhaust .
If the mixture is too rich (too little oxygen) or too lean (too much oxygen) than the oxygen sensor sends a signal to the ECU telling it to adjusts the amount of fuel entering your engine accordingly.
Too much oxygen in the exhaust gases indicates a lean mixture. A lean mixture tends to produce more nitrogen oxide pollutants NOx, and in some cases it can cause poor performance including misfire and even engine damage with the engine running too hot.
Too little oxygen indicates a rich mixture, which wastes fuel and reduces economy, and the unburned fuel results in excess emissions.
So, a properly working oxygen sensor is a necessity for any vehicle. Neglecting to replace a bad oxygen sensor will usually result in damage to your catalytic converter.
Function:
The oxygen sensor works by sending information to your vehicle’s engine control unit (ECU) to help your car run efficiently as well as to reduce emissions.
Oxygen sensors works as a result of the varying amounts of oxygen in the vehicle exhaust verses the amount of oxygen in the atmosphere. An oxygen sensor generates a voltage signal, or changes its resistance, proportional to the amount of oxygen in the exhaust gas and sends this signal to the onboard computer or ECU (Engine Control Unit), which in turn regulates the air fuel mixture to the desired optimal level.
What to do if can't find your oxygen sensor in our website ?
If you can't find your oxygen sensor type in our website, you could send your sample to us , we can produce according to the sample. Minimum quantity is 50 pcs, and with reasonable price.
About Us:
Our company specialized in auto spare parts over 15 years, supply all kinds of auto parts with rich experience , proven technique. Especially for chassis parts: engine mount, control arm, brake pads, brake disc, brake caliper, bearing , hub bearing, steering rack , tir rod end, rack end, ball joint, and electrical parts: sensor, clock spring, window switch, spark plug, ignition coil, injector, fuel pump, and lot of HONDA spare parts for Accord, Civic, CR-V , Fit, City, Odyssey. We really hope we can make a forever business cooperation relationship and friendship.
MHC AP Oxygen Sensor Advantages:
1. Our oxygen sensor is from Japan, Same as original quality. |
| 2. Small order acceptable. |
3. Sample acceptable. |
| 4. Competitive Price. |
Contact us:
If you have any questions, please feel free to contact with us. We would be very glad to help you. We will get back to you within 24 hours or get back to you immediately.
