|
[China]
Trade Verify
Address: Room 1309, Tower B, Jiada International, Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
Contact name:Wayne
Guangzhou Meklon Chemical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
High Quality Refinishing 1K Transparent Blue Basecoat Clear Reflective Spray Paint
Product Introduction
We offer a full complement of mixing and tinting equipment.contains
clear coatings, hardeners, thinners, binders, 1K basecoat toners
(solid, silver, and pearl colors), 2K topcoat toners, 1K and 2K
primer surfaces, epoxy primers, plastic primers, and other primers.
Additionally, our system offers all of the recipes for the
automotive industry, including those for Nissan, Honda, Toyota,
Ford, Chrysler, Fiat, Peugeot, Citroen, Renault, and others.
Meklonpaint
1. MeklonCar Paint features a full range of tinting and mixing
systems and is a low strength intermix system.
2. MeklonCar Paint consists of clear coats, hardeners, thinners,
binders, solid, silver, and pearl colored 1K basecoat toners, 2K
topcoat toners, primers (1K primer surfacer, 2K primer surfacer,
epoxy primer, and plastic prime), primer surfaces, and primers.
| Type | 1K Transparent Blue basecoat color paint | |
| Substrates | Well-sanded,completely dried and good existing finishes as: A. original paint B.old paint firm C.1K or 2K primer | |
| Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry, again with degreaser. | |
| Mixing Ratio | Basecoat | Thinner |
| <15°C | 1K Transparent Blue basecoat color paint | 602 Fast Thinner |
| 15-30°C | 1K Transparent Blue basecoat color paint | 602 Standard Thinner |
| >30°C | 1K Transparent Blue basecoat color paint | 602 Slow Thinner |
| Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C | |
| Re-Treatment | After Spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | |
| Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² | |
| Spray Technology | Coats & Thickness: 2-3 coats, total 15-20um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. | |
| Shelf Life | 2 years in original sealed can, cool and dry place at 25°C | |
| OEM/ODM | As customers' order | |
| Package Size | 1L*12 Tins or 3.75L*4 Tins | |
Note:
1. The substrate must be cleaned and sanded before spray, wet
sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder
Solvent into thinner to avoid blushing. For more details, please
refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic
paint film should be 15-25um.
Our Advantages
