|
[China]
Trade Verify
Address: Room 1309, Tower B, Jiada International, Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
Contact name:Wayne
Guangzhou Meklon Chemical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
High Application Solvent Oil Based High Gloss Acrylic 2k Pure black Car Paint Auto Refinish Paint
| Pot Life | 24 Hours,25ºC | ||
| No.of Coats | 2-3 coats | ||
| Flash-off Time | 2-3 mins at 25ºC | ||
| Film Thickness | 10~20 micron | ||
| Spraying Tool | Gravity feed: 1.2~1.5mm | ||
| Suction feed: 1.2~1.7mm | |||
| spraying pressure: 3-5kg/square centimetre | |||
| Drying Time | At 25 ºC, after 15 minutes, spray varnish within 1 hours | ||
| Using Substrates | The surface of old paint or primer after sanding with the P1000# sandpaper or removing the oil | ||
| Others | After spraying 2K metal paint, should spray varnish within 1 hour
as much as possible,to ensure the accuracy and repeatability of
color formula, stir equably before application | ||
| Type | 2K car paints and refinishes | |||
| Substrates | Well-Sanded,Completely dried and good existing finishes as below: A. Original paint B.Old paint firm C.1K or 2K primer | |||
| Mixing Ratio | 2K Solid Colors(2) | Hardener(1) | Thinner(0.2-0.4) | |
| <15°C | 2K Solid Colors | 120 Fast Hardener | 602 Fast Thinner | |
| 15-30°C | 2K Solid Colors | 120 Standard Hardener | 602 Standard Thinner | |
| >30°C | 2K Solid Colors | 120 Slow Hardener | 602 Slow Thinner | |
| Spray Viscosity | 16-19s to drop off, in 4# viscosity cup at 25°C | |||
| Re- Treatment | There are particles or runs after spray, sand affected area with P2000 sand paper after thorough dring, then polish to solve it. | |||
| Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² | |||
| Spray Technology | Coats & Thickness: 2-3 coats, total 35-50um Flash-Off Time: At 25°C ,5-10 minutes between two coats Air-Drying Time: Allow 10-15 minutes air drying before force drying | |||
