Rapid Deployment Riot Barrier

It is designed for rapid deployment of effective barriers during the police and other special operations. It is a serious obstacle to the entry of people and vehicles. Mobile razor fence security barrier is packed in a container. The container is made of wire with a diameter of 6 mm in the form of 2 baskets with 4 knobs and 3 locks to connect the circuit and baskets for transporting. It is a spiral security barrier concertina enclosed in a specially designed lightweight cassette that provides the ability to quickly deploy, collapse of the barrier, and its safe transportation. The mobile security barrier is designed for portability, expanding and collapsing the calculation of two people. Ease of assembly is ensured by special hooks. The ends of the coil fixed to the basket brackets. On handles attached rope with hooks to secure the baskets for the materials at hand when you install the mobile barrier.

Measurements and specifications of the trailer:

1. Length:8150 mm

2. Width:3100 mm

3. Height: 4000 mm

4. The trailer designed to carry 3 rolls of barbed wires placed longitudinally inside special pipes to carry the wires without overlapping each other.

5. The height between the Trailer vin and the ground is 30 cm.

6. The axes , doors and the sections are made of steel processed against rust and aluminum. 

7. The trailer Provided with a tool to withdraw from the front, extra chains and another tool to withdraw stored in the tool box.

8. Load capacity 3 TONS.

9. Dimension of the vehicle 150 x 150 or 160 x 80 mm with 5.50 mm length.

10. Total 5 tires. And 4 of them on the sides and one spare tire Wight 30 pound. Tire Wight 7 KG . 

measurement of tire 70/175, R13

11.Installing front tire to facilitates the installation and downloading of the trailer.

12. Brake lights , signals and electricity link  with car battery according to international traffic system.

13. Wires balancing: when its deploying, the wires will be on a balanced vin when the trailer is moving to reach a speed of 75 km and the speed of the wind is max 80, The wires should perfectly stable prior to ,during and after deployment. 

14. The trailer is numbered with engraved litters for easy reading.

15. Supplying the trailer with three signals (blue) or (red).one in the front and two at the back supplied with energy from car battery.

Measurements and specifications of the wires:    

1. The dragging system (NATO STANDERDS) 76 MM with manual brakes to use in the stoppage.  

2. 5 clutches ferrous to put wires together .

3. Taking into account the ease of dropping down the wire from vehicle during the opening of the wires and collecting it .

4. The blade is special type according to NATO STANDERDS :#5660-99-371-1515

5. The wires loop made of stainless steel-clip dovetail type

6. The weight of the empty trailer without wires is 1200 kg

7. Width of the trailer with the wires 230cm ,width of the rolls when deploying 140 cm.

8. Height between barbed wires and ground when deploying 155cm .length 75 meter.

9. The Wight of the tools box and other additional equipment like clutches and flash lights is 20 KG.

10.The total weight for the barbed wires and the additional equipment like tools box ,frame , clutches ,flash light 1300 kg.

11. 50 kg of the total load for safety.