Home Companies Innovation Biotech (Beijing) Co., Ltd.

Covid 19 Coronavirus Rtk Antigen Rapid Test Cassette And Saliva Lollipop Test

Contact Us

Trade Verify

Address: sales@rapid-test-kit.com, Room 901 Building #4 Yard No 26, Financial Street Gucheng, Shijingshan District, Beijing China

Contact name:Rebecca

Innovation Biotech (Beijing) Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Covid 19 Coronavirus Rtk Antigen Rapid Test Cassette And Saliva Lollipop Test

City & Province	beijing beijing

Product Details

10-15 Minutes One Step Covid 19 Rapid Test Kit Rtk Antigen Rapid Test Cassette Saliva Lollipop

Product Description

One Step Antigen Saliva Home Use Test Covid 19 Ag Saliva Rapid Test Kit (Lollipop)

COVID-19 Ag Rapid Saliva Test Device is a rapid chromatographicimmunoassay for the qualitative detection of N antigen from SARS-CoV-2 present in human saliva within the first 7 days of symptom onset. This test is for professional used only, as an aid toearly diagnosis of SARS-CoV-2 infection in patient.The result of this test should not be the sole basis for the diagnosis; confifirmatory testing is required

Date sheet

Product name:	Covid -19 Ag saliva rapid test kit
Format:	Card
Specimen:	Saliva
Sensitivity:	95.6%
Accuracy:	98.21%
Specificity:	99%
Packing	25pcs/box; 5pcs/box; 1pcs/box
shelf life	2years
Certificate:	CE , FSC, Bfarm PEI and EU Common list

Directions for Use

Do not place anything into the mouth including food, drink, gum, or tobacco products for

at least 10 minutes prior to collection of saliva specimen.

1.Remove the swab from the sealed pouch.

2.Cough deeply twice before collecting the samples.

3. Insert the sponge end of the collector into the mouth. Then swab back and forth along the

gum line from one end to the other end of the upper and lower gum for 3 to 5 times. Then

slowly scrape the cheek inside the mouth for 3 to 5 times and slowly scrape the tongue

surface for 3 to 5 times.Then put the collection pad on the tongue for 1 minutes

4.Open the lid of the collection tube. Remove the saturated collector pad out of the mouth

and place it into the tube which contains 1 ml sample extraction buffer, and then fully

stirred along the wall of the tube. Break off the collector, leaving the sponge end of the

collector in the chamber.

5.Tighten the lid of the collection tube and mixing liquid of the chamber well before using

(Shaking up and down for about 20 times).

Allow the test, specimen, extraction buffer to equilibrate to room temperature (15-30°C) prior to testing.

1. Remove the test device from the sealed foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed immediately after opening the foil pouch.

2. Put the test device on a clean and level surface.

3. Shake the swab specimen in the extraction vial to well mix.

4. To run test, twist open the bottom screw cap of the extraction vial to expose dropper tip.Transfer 3 drops (~90μl) of the specimen to the sample well of the test device and make sure a colored liquid appearing in the detection window in 30 seconds. Replace cap cover on the extraction vial.

5. Start timer. Read the result at 10~20 minutes. Do not interpret the result after 20 minutes.

Interpretation of Results

NEGATIVE:

Only one red band appears in the control region (C), and no band in the test region (T). The negative result indicates that there are no Novel coronavirus antigen in the sample or the number of viral particles is below the detectable range.

POSITIVE:

Two red bands appear. One red band appears in the control region (C), and one red band in the test region (T). The shade of color may vary,but it should be considered positive whenever there is even a faint band.

INVALID:

No red band appears in the control region (C). The test is invalid even if there is a band on test region (T). Insufficient sample volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the test procedure and repeat the test using a new test device

Company Information

Innovation Biotech (Beijing) Co., Ltd. is a biotechnology company specializing in research, development and manufacturing of advanced medical in-vitro diagnostic (IVD) rapid test kits, medical and laboratory disposal products. We provide one step medical diagnostic rapid test kit based on our INVBIO brand, Product include Fertility Tests, Tumor markers, DOA drug of abuse test, Drug test cup, Urinalysis reagent strip, ELISA kit, Digital alcohol tester, urine analyzer, et.

OEM packaging is available, drug of abuse test, troponin I test, alcohol screening saliva test strips, urine strips, elisa kits, microscope slides

Our focus is to expand our markets internationally by forming strategic alliances and entering into partnerships with distributors worldwide. We have established an international reputation for excellence in the manufacturing of quality medical and laboratory products. In addition, we have obtained approval licenses ISO13485, FSC certificate, and most of our products get CE mark Our objective is the utmost satisfaction of our clients all around the world by supplying our quality and economical products

Certifications

FAQ

Q: What is your payment terms?

A: Payment terms: 100% TT before shipment

Q: Can you send samples?

A: Yes,SAMPLES can be sent for your evaluation.customer pay the freight charge

Q: Do you give any discount?
A: I'll surely try my best to help you get those by the best price and good service at the same time. We promise the best price upon same quality, and best quality upon same price.
Q: How to order?
A: Please tell us the model and quantity and package requests.
b. Proforma Invoice confirmed, the order will be arranged upon receipt of your payment.
c. Confirm and ship the goods.
d. We will help to track your goods until you receive them safely.