Home Companies MAGNUS INTERNATIONAL LIMITED

PP Body Specimen Collection Bottle Electron Beam Irradiation Sterile MSDS Approved

MAGNUS INTERNATIONAL LIMITED
Active Member

Contact Us

[China] country

Address: F12, Xincheng International Mansion A, No. 234 Huapao Ave., Liuyang, Hunan 410300 China

Contact name:Marx Wu

Inquir Now

MAGNUS INTERNATIONAL LIMITED

PP Body Specimen Collection Bottle Electron Beam Irradiation Sterile MSDS Approved

Country/Region china
City & Province hunan
InquireNow

Product Details

Collection and transportation of covid 19, clinical flu, avian flu,

HFMD, measles, and other virus samples

 

【Kit Features】

  • FDA Approved
  • Swabs and Tubes are sterilized using High Energy Electron Beam Irradiation,

          which can ensure the biological safety of the sampled person.

  • Lot number located on each kit to allow for full specimen traceability
  • Kits can be stored for up to 1 year at room temperature.
  • The expiration date on each tube, swab, and kit.
  • Biohazard Bags with the absorbent pad are available.
  • Samples available to test and verify.
  • Bulk packaging is available to save you money.

 

【Sterilization】

The Virus Specimen Collection Tube and Disposable Sampling Swab are sterile.

 

 

 

SAMPLE REQUIREMENTS

 

1. Swab and Tube are sterilized using High Energy Electron Beam Irradiation, which can

    ensure the biological safety of the sampled person.

2. Lot number located on each kit to allow for full specimen traceability Kits can be stored up

    to 2 years at room temperature.

3. Expiration date on each tube, swab, and kit Biohazard Bags with the absorbent pad is

     available.

4. Samples available to test and verify.

5. Bulk packaging is available to save you money.

 

Applicable sample types: Oropharyngeal, Nasopharyngeal, Saliva, Sputum, and other clinical

samples. Storage and transportation of samples: After the sample is collected, it should be

transported to the corresponding laboratory for testing within 48 hours, and the storage

temperature is 2-8℃. If it cannot be transported to the laboratory within 48 hours, it should

be stored at -20℃ or below and sent to the corresponding laboratory within one week.

The sample should avoid repeated freezing and thawing

 

PACKING

 

40Testing Kits/ box & 50Testing Kits/ box

 

Standard

1nasalswab+10mltube+3ml inactivation/Non-inactivation medium

 

INTENDED USE

 

It is used for the collection and transportation of clinical COVID-19, Influenza, Avian

Influenza, Hand, Foot and Mouth Disease, Measles, Chlamydia, Mycoplasma, and

Ureaplasma specimens.

 

【MAIN COMPONMENTS

 

NumberComposition40 Testing Kits/box50 Testing Kits/box
1Sampling Tube (with 3ml inactivated solution)3ml × 40 tubes3ml × 50 tubes
2Nasal Swab40 pcs/box50 pcs/box
3Manual1 test1 test

Package
Each kit includes “a 10ml tube + 3ml VTM liquid (Or Medium) + 1 sampling nasal

swab or oral swab (Pick one of two)”.

Individual PackageBulk Package
50 kits/box50 kits/box
16 boxes/carton20 boxes/carton
Box Size : 225*145*165 mm
Weight : 0.7 kg
Box Size : 225*145*165 mm
Weight : 0.7 kg
Carton Size : 600*480*350 mm
Weight:12.5 kg
Carton Size : 620*470*350 mm
Weight : 14 kg

 

Our disposable virus specimen collection tubes are used for the collection and transportation of

Novel Coronavirus/SARS COV-2, Influenza, Avian Influenza, Hand, Foot and Mouth Disease,

Measles, Chlamydia, Mycoplasma, and Ureaplasma specimens.

 

【Summary and Principles】

 

The Disposable Virus Specimen Collection Tube is a collection and transport system suitable

for collection, transport, and long-term freeze storage of clinical virus specimens.

The sampling solution(Viral Transport Medium) comes in a plastic, screwcap10mltube and

used for the transport of clinical specimens from the collection site to the testing laboratory.

The composition of Viral Transport Medium is modified Hank's inactivated buffer, and

using Viral Transport Medium to transport and store the virus will cause viral inactivation.

The Disposable Sampling Swab is composed of Nylon flock and ABS. The flocked swab

contains short perpendicular fiber strands attached to flexible molded plastic. The swab

has a molded breakpoint in the shaft of the applicator which is highlighted with an

indication line marked on the shaft of the applicator. After the sample is collected from

the patient, the molded breakpoint facilitates easy breakage of the swab applicator into

the tube of transport medium. There are two modes of Disposable Sampling Swabs:

Nasal swab and Oropharyngeal swab. Users can choose one of the Nasal swabs and the

Oropharyngeal swab.

 

 

STORAGE CONDITIONS

 

Store at temperature 5 - 25 ℃.

 

 

INSTRUCTIONS

 

1.  Mark the sample information on the tube.

2.  According to different sampling requirements, use a sampling swab to sample at the corresponding area.

     Hold the handle to gently insert the sampling swab into the sampling site, gently rotate the swab 3-5

     times and slowly take out.

3. Put the extracted sample into the sampling tube, break the swab at the breaking point and leave the

     swab head in the tube. Tighten the tube cap to complete the sampling.

4. Freshly collected clinical specimens should be transported to the laboratory within 48 hours at 4 ° C.

     Those that cannot be sent to the laboratory within 48 hours should be stored at -20 ° C or below.

5.  The conventional sampling methods are as follows: Nasal swab: Insert the head of the swab gently

     into the nasopalatine part of the nasal canal, stop for a while, and then slowly rotate it out. Repeat to

     another nostril with a new swab. Once the specimen is collected, immerse the head of the swab into the

     sampling solution, and discard the tail. Oropharyngeal swab: Use a swab to wipe the bilateral

     pharyngeal tonsils and posterior pharyngeal wall. Immerse the swab head in the sample solution and

     discard the tail. Mouthwash: Gargle in the mouth with 10ml of normal saline. Let the patient's head

     tilt back slightly and make an "Oh" sound. Let the saline rotate in the pharynx then collect the wash

     with an empty 50ml sampling tube. Nasal wash: While seated, the patient tilts their head slightly back

     and is injected with 50 ml of normal saline into one nostril with a pipette. Collector instructs the patient

     to simultaneously sound “K” to close the pharyngeal cavity. The patient then bows their head to let the

     saline flow out as the fluid is collected with an empty 50 ml sterilized tube. Repeat this process to wash

     the other nostril. Nasopharyngeal extract: Tracheal and bronchial secretions are often collected using

     this method. Mucus is drawn from the nasopharynx with a collector connected to a negative pressure

     pump. First insert the collector head into the nasal cavity, turn on the negative pressure, rotate the

     collector's head, and slowly push it out. Collect and draw the mucus, and rinse the collector three times

     with 5 ml of the sampling solution. Autopsy tissue specimens: Collect autopsy tissue specimens if

     necessary, to separate sample components. The specimen is autopsy tissue. Samples of mycoplasma,

     chlamydia, ureaplasma: for males, inserts the sterilized swab into the urethra about 2cm, rotate, and

     take out. Let the material rest for several seconds. For females, wipe out the cervical mucus and inserts

     the sterilized swab into the cervical canal 1cm-2cm to take out material.

 

【WARNING】


1. Unused swabs should not be re-sterilized.
2. This product is for single use only; reuse may cause a risk of infection and/or

     inaccurate results.
3. Do not re-pack.
4. Not suitable for any other application than intended use.
5. Do not ingest the medium.
6. To be handled by trained personnel only.
7. It must be assumed that all specimens contain infectious micro-organisms;

     therefore, all specimens must be handled with appropriate precautions.
8. After use, tubes, and swabs must be disposed of according to laboratory regulations

     for infectious waste. Observe CDC Biosafety Level 2 recommendations.
9. The composition of Renji VTM is modified Hank's inactivated buffer and using

     Renji VTM to transport and store the virus will cause viral inactivation.

 

INDEX OF SYMBOL

EXPORTER

 

Magnus International Limited

 

F12, New City International Mansion A, 234 Huapao Ave.

Liuyang, Hunan Province 410300 China

 

Contact: Goodwellmedical@gmail.com

 

MANUFACTURER

 

Changsha Renji Medical Equipment Co., Ltd.

 

No.18 Xiangtai Road, Liuyang Jingkai District,

Changsha City, Hunan Province 410300 China

 

AUTHORIZED REPRESENTATIVE

 

Lotus NL B.V.

Koningin Julianaplein 10, 1e Verd, 2595AA, The Hague, Netherlands.

 

FACTORY VIEW

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 3

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 4

 

FACTORY WORKSHOP

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 5

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 6

 

PRODUCT AND STANDARDS

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 7

 

【CERTIFICATIONS】

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 9

 

Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 10

 

【FAQ

 
1. Q: How about your healthcare and medical product quality?
 
A: Quality is our top priority. We have a professional quality control team to ensure the
quality with a high standard and regulated with the pro certifications. The QC team is
responsible for quality checking in each process and inspect every batch of our production
and ship them only after QC approval.
 
2. Q: What is your order MOQ?
 
A: Please contact the customer service, and the price is negotiable for large quantity.
 
3. Q: How about your product packing for shipment or mailing?
 
A: We prepared well neutral package for our products. We could also make OEM package,
OEM/ODM Custom Package/Multi-packing package/Cartons with well protective wrapping.
 
4. Q: What level of your product price?
 
A: We are the factory and direct manufacturer and offer competitive prices. We also offer
the volume pricing with more benefits depend on your order quantity level. Please let us know
your ordering volume while you make the inquiry to us to help you obtaining better benefits.
 
5. Q: What's the price terms?
 
A: The price is based on FOB of Hunan, China with exchange rate at RMB6.40 for USD$1.00.
If the exchange rate floating sharply lower than 6.3 or higher than 6.5, we should adjust the
price with real-time exchange rate.
 
6. Q: What's the payment terms?
 
A: We accept T/T wire transferring, PayPal, Western Union, etc. 50% down payment after
signing the contract and rest 50% before shipping confirmation.
 
7. Q: How could I get some samples?
 
A: We are able to deduct your samples expense once your orders confirmed with us.
The shipping fee will be calculated with the sample volume what you demand.
 
8. Q: Could you accept OEM order?
 
A: Yes, we could. We have professional designers who can design the logo or artwork and offer
best solution & styles for your OEM product choices.
 
9. Q: How long will the shipping or express take?
 
A: (1) For the international expresses such as DHL, UPS, FedEx, TNT, or EMS, etc., it usually
takes 5-7 working days to your location or destination.
(2) If shipping with containers, they will take about 30-60 days to process depending on
the vary ports or door locations.
(3) We will arrange your products delivery or shipping within 1-3 days after full payment
has been confirmed. We may not ship your products out until your payments arrive to
our bank account successfully.
 
10. Q: How do you deliver the goods to us?
 
A: If the order of small volume package, we could deliver by courier such as DHL, UPS, FedEx,
TNT, EMS. For the large volume order, we could ship with bulk cargo containers by sea.
We will provide you cost-saving recommendations for your product shipping.
 
11. Q: What is the warranty time.
 
A: One year f each product.
 
Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 8
 
SHIPPING
 
Sterile Pipette Tips, Filtered, DNAse and RNAse Free, Autoclavable - 200 µl 11
 
We are the trusted healthcare and medical supplies from China.
Be free to contact us at any time!

You are very welcome to email us today at:
Goodwellmedical@gmail.com for the inquiry!

We are excited to build a reliable and long-term business with you
at our best!

Hot Products

Monkeypox Virus(MPV) Nucleic Acid Detection Kit (Real-Time PCR Method) ››› World’s Fastest Covid ...
Renji Medical Antigen Rapid Test Kit , Nasal Swab Igm Rapid Test Cassette SGS Certification Rapid ...
Fast And Safety Coronavirus Antigen Detection Kit Saliva Antigen Test Kit (Coloidal Gold) ››› ...
COVID-19 Antigen Nasal Swab Test Kit (Coloidal Gold) CE Marked For Self Testing ››› Reliable & Rapid ...
COVID-19 Antigen Nasal Swab Test Kit (Coloidal Gold) CE Marked A Single-Use Test Kit ››› Reliable & ...
【PRODUCT NAME】 Monkeypox Virus (MPV) Nucleic Acid Detection Kit (Real-time PCR Method) 【Package ...