Active Member
|
[China]
Address: No.199 Huanlou Road,Economic Development Zone,Kunshan City,Jiangsu
Contact name:
Suzhou Zhongyue Railway Material Co.,Ltd. |
|
|
Description
ZHONGYUE is engaged in manufacturing and supplying a wide range of rail sleeper screw. Designed with high precision and processed under advanced technologies, these rail sleeper screws are manufactured using high grade raw materials, satisfying all the quality standards. With reliability, robustness and effective performance, these products can be used in railway engineering.
Rail sleeper screw spikes are used to fasten sole plates and ribbed base plates to wooden sleepers. In rail construction with the concrete sleepers, the rail sleeper screw is used in combination with a plastic dowel pressed in the concrete sleeper, indirect or direct fastenings of rails on concrete and wooden sleepers. Characteristically, the sleeper screw thread may only be produced in a hotforming operation. The different shapes of the head correspond to the pass form of the respective spanner used for fastening and loosening of the rail sleeper screws.
The screw spike costs more to manufacture than the dog spike or dog nail, but has the advantage of greater fixing power; approximately twice that of a dog spike, and can be used in combination with spring washers.
ZHONGYUE can supply a range of rail sleeper screw spikes manufactured to international standards according to BS, ASTM and DIN, among others. ZHONGYUE has extensive experience in the rail industry and a high level of expertise in this specialized field. ZHONGYUE can manufacture any quantity, big or small, and offers a range of finishes including hot dipped galvanized, black, sherardized or self color for the budget conscious.
Rail sleeper screw spikes with big disk are mostly used in South America and Africa
A taper of 1mm in the core and thread diameters towards to the
point of the screw over the portion shown parallel is allowed,
provided the tolerance on the diameter at the upper end is not
exceeded. The material for the rail sleeper screw is complying with
British standard N 15-1961.
Diameter: 22mm, 23mm
Length: 105mm, 115mm, 125mm, 133mm, 178mm
Grade: 4.6, 5.6
Material: Q235, 35#
Surface Treatment: Plain (oiled), Black painting, Zinc, HDG
| Diameter | Length | Head Diameter | Head Height | Head Button Height | Head Washer Height | Head Overall Height | Head Width | Head Length | Thread Length Nominal |
|---|---|---|---|---|---|---|---|---|---|
| 11/16" | 6-3/4" | 2" | 23/32" | 1/8" | 1/4" | 31/32" | 7/8" | 7/8" | 4-5/8" |
| Diameter | Length | Head Diameter | Head Height | Head Button Height | Head Washer Height | Head Overall Height | Head Width | Head Length | Thread Length Nominal |
|---|---|---|---|---|---|---|---|---|---|
| 11/16" | 6-3/4" | 2" | 1-1/8" | 1/8" | 13/32" | 1-1/8" | 7/8" | 7/8" | 5-3/8" |
| Diameter | Length | Head Diameter | Head Height | Head Button Height | Head Washer Height | Head Overall Height | Head Width | Head Length | Thread Length Nominal |
|---|---|---|---|---|---|---|---|---|---|
11/16" | 6-3/4" | 2" | 23/32" | 1/8" | 13/32" | 1-1/4" | 27/32" | 1-1/8" | 4-5/8" |
| Brand | ZY | |||
| Type | Ss5.-150 | V20-135 | ||
| Ss8-140 | V23-115 | |||
| Ss8-150 | V23-135 | |||
| Ss8-160 | V23-155 | |||
| Ss23-160 | V23-215 | |||
| Ss25.-165 | V26-115 | |||
| Ss35.-161 | ||||
| Or the type by customers’ drawings | ||||
| Grade | 4.6 | 5.6 | 8.8 | 10.9 |
| Material | Q235 | 35# | 45# | 40Cr |
| Mechanical properties | Tensile strength: ≥400Mpa | Tensile strength: ≥500Mpa | Tensile strength: ≥800Mpa | Tensile strength: ≥1000Mpa |
| Yield strength: ≥240Mpa | Yield strength: ≥300Mpa | Yield strength: ≥640Mpa | Yield strength: ≥900Mpa | |
| Elongation:≥22% | Elongation:≥20% | Elongation:≥12% | Elongation:≥9% | |
| Cold bending: 90 degree without crack | Cold bending: 90 degree without crack | Cold bending: 90 degree without crack | Cold bending: 90 degree without crack | |
| Surface | plain (oiled), Oxide black, Zinc, HDG, wax, bitumen, Dacromet, Sherardizing | |||
| Standard refers | ISO898-1, UIC864-1, and NF F500-50 | |||
