Nitrogen consumption 380V Three phase 50HZ Aluminium Brazing
Furnace
The aluminium radiator brazing furnace is used to braze aluminum
heat exchangers such as radiators, intercoolers,evaporators,and
heater radiator under protective nitrogen atmosphere. The flux used
is NOCOLOK flux.
The drying oven is an important part of the aluminium radiator
brazing furnace line, and it decides the final brazing quality.
The radiators are well dried by the drying oven, and the dried
parts are an important precondition of a high quality brazing
process.
Product quick details:
Mesh belt operating surface height | 900mm |
Normal operating temperature | 600~650℃ |
Furnace temperature uniformity | ±3℃ |
maximum service temperature | 700℃ |
effective working size | 1000mm(Mesh belt width)×250mm(Height of mesh belt) |
The channel size | 1050mm×300mm(Straight edge height) |
Temperature control zone | 6 points in Section 6 of Section 3 (temperature measurement) |
Temperature measuring point layout | The upper and lower of each section + furnace temperature
measurement |
design power | 240KW±10% |
Temperature control mode | PID,The work pressure regulating |
heating mode | resistance wire |
length of heating zone | 6M |
conveying chain | SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm |
Product charcateristics:
A. The shell is composed of Q235-6mm thick steel plate and
structural steel.The top is fixed and sealed by bolts and the side
for easy maintenance;
B. The top, wall and bottom of the furnace are equipped with
needled blanket fiber cotton insulation materials.The roof
insulation material will be attached to the removable roof On the
cover.The use of needled blanket fiber cotton insulation can ensure
low heat storage and easy to control the temperature;The insulation
layer is made of ceramic fiber needled blanket made by Shandong
Luyang Stock Co., Ltd., which has excellent thermal insulation
performance and can save more than 30% electric energy when heating
up.
C. The helical electric heating wire is inserted into the furnace
body from the side through the insulating porcelain tube, and the
opening is blocked with the ceramic plug head to prevent heat loss
and facilitate the replacement;
D. MUFFLE adopts SUS304-6mm, SUS316L-6mm plate of TISteel. After a
large folding machine, the furnace MUFFLE has a folding length of 6
meters, and a V-shaped groove is pressed at the bottom.
E. Stainless steel towing rail is used at the bottom of muffle to
facilitate muffle sliding by thermal expansion and cold
contraction;
F. Two nitrogen pipelines and one thermocouple for temperature
measurement are installed inside muffle;
G. Nitrogen pipeline flowmeter is installed below the static
cooling chamber, which can adjust the three-way flow of the inlet
of the front curtain chamber, the brazing furnace and the rear
chamber;
H. The brazing furnace will be divided into 3 independent areas.The
brazing chamber uses a plug-in heating element made of 0Cr25Al5
alloy, mounted separately on the top and bottom of the muffle of
each brazing chamber.The heating design takes into account the
thermal expansion and expansion rates of different components.All
the information displayed shows the maximum capacity of each zone
rather than the general production capacity.The actual amount of
input will depend on the component.To be altered by particular and
inherent differences;
About us:
Our company has been engaged in the
manufacture and development of automobile radiator condenser
products for more than 15 years. Most of the products are sold to
all countries and regions in the world, and have accumulated rich
production experience.Our company is good at manufacturing all the
process of the radiator tank production line.In recent years,many
companies from other countries in the same industry also bought the
CKD from us and purchased the machine equipment from us as well.
With the development of heat exchange industry,
more and more countries and regions are committed to building local
radiator condenser plants. With our understanding of the industry,
we have been helping foreign customers to set up radiator factories
and provide the production machine in the region in the past five
years. We provide customers with pre-sale and after-sale equipment
design and service according to the size of our products.In the
meantime we will also provide the material to our customers as
well. We will send technicians to guide the installation on site to
ensure the smooth production of the customer's factory, and provide
free consultation service in case of any doubt in the production
process.
At the same time, our company provides
customers with all kinds of radiator, condenser required hardware
and plastic components. Ensure the supply and quality of finished
products.
If you are interested in setting up a radiator
factory in your place or buying any products , please contact us
and we will provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
2.Does the aluminum Brazing furnace machine is customized or
standard size?
The aluminum Brazing furnace machine is customized by customers
according to their respective capacity requirements and product
series specifications.
3.Does the aluminum Brazing furnace machine use gas?
The aluminum Brazing furnace machine can use natural gas as a
productive energy source.
4.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided.