|
[China]
Trade Verify
Address: RM2729, TOWER 1, NANSHUN SQUARE, JIANPING ROAD, GUICHENG NANHAI, FOSHAN CHINA.
Contact name:Annie
FOSHAN SUNHOPE CO.,LTD. |
|
Verified Suppliers
|
|
|
Aluminium Radiator Brazing Furnace Hydrogen Inert gas controlled atmosphere furnace Mesh Belt 150-600mm/Min
Product introductions:
Aluminum brazing furnace system with controllable
atmosphere is mainly used for continuous brazing of aluminum water
tank, oil cooler, intercooler, warm air, tubular condenser,
evaporator, parallel flow condenser, cascade evaporator, air cooler
of power station under nitrogen protection atmosphere.
The mesh belt continuous controlled atmosphere cooper
and aluminum brazing furnace is used to braze aluminum heat
exchangers such as radiators, intercoolers, evaporators,
and heater radiator under protective nitrogen atmosphere.
Product quick details:
| Mesh belt operating surface height | 900mm |
| Normal operating temperature | 600～650℃ |
| Furnace temperature uniformity | ±3℃ |
| maximum service temperature | 700℃ |
| effective working size | 1000mm(Mesh belt width)×250mm(Height of mesh belt) |
| The channel size | 1050mm×300mm(Straight edge height) |
| Temperature control zone | 6 points in Section 6 of Section 3 (temperature measurement) |
| Temperature measuring point layout | The upper and lower of each section + furnace temperature measurement |
| design power | 240KW±10% |
| Temperature control mode | PID,The work pressure regulating |
| heating mode | resistance wire |
| length of heating zone | 8M |
| conveying chain | SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm |
Product features:
1. Degreasing Chamber
2. Front Curtain Chamber system
3. Heating Chamber
4. Air Cooling System
5. Rear Curtain Chamber
6. Second Air Cooling System
7. Control System
8. Fluxing Chamber
9. Drying Chamber
10. Installation, Commissioning and Customer Trainin
About us:
Our company has been engaged in the manufacture and
development of automobile radiator condenser products for more than
15 years. Most of the products are sold to all countries and
regions in the world, and have accumulated rich production
experience.Our company is good at manufacturing all the process of
the radiator tank production line.In recent years,many companies
from other countries in the same industry also bought the CKD from
us and purchased the machine equipment from us as well.
With the development of heat exchange industry, more
and more countries and regions are committed to building local
radiator condenser plants. With our understanding of the industry,
we have been helping foreign customers to set up radiator factories
and provide the production machine in the region in the past five
years. We provide customers with pre-sale and after-sale equipment
design and service according to the size of our products.In the
meantime we will also provide the material to our customers as
well. We will send technicians to guide the installation on site to
ensure the smooth production of the customer's factory, and provide
free consultation service in case of any doubt in the production
process.
At the same time, our company provides customers with
all kinds of radiator, condenser required hardware and plastic
components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator
factory in your place or buying any products , please contact us
and we will provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
2.Does the aluminum Brazing furnace machine is customized or
standard size?
The aluminum Brazing furnace machine is customized by customers
according to their respective capacity requirements and product
series specifications.
3.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided.
