|
[China]
Trade Verify
Address: A7-101, Hangyu building, Wuhan University Sci & Tech Park, East Lake High-tech Dev. Zone, Wuhan, Hubei, China
Contact name:Sherry Xiao
Wuhan Questt ASIA Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Electric 200W Power Fiber Laser Cleaning Machine For Metal Surface
Treatment
Description:
QA-LC200 clean laser equipped with a 200W Mopa fiber laser source,
the pulse width can be adjusted from 1-400ns, so it can make
precision cleaning, like plastic injection mold ,autombile plastic
mould and mirror stainless steel.
Laser rust removal using laser high energy, high frequency, high power characteristics, the high energy instantly deposited in a small area, the use of high-temperature oxidation of the oxide layer.
Small area cleaning and paint removal treatment, welding surface pretreatment, food line cleaning, printing wheel cleaning, precise position/size paint treatment, restoration of monuments, rust/oxide removal;
The whole surface or the designated part of the paint off, the welding department to remove paint inspection, the removal of oxides, oil, grease and production residues;
New welding point Preparation, metal surface roughness, rapid dust/oxide, oil, grease and production residues; industrial, military and shipbuilding industry-product coating high-speed cleaning, NDT welding inspection coating cleaning;
Product features:
1. The impact of a short period of time will not cause metal surface heating, no damage to the substrate.
2. Pollution-free: It is easy to solve the environmental pollution problems caused by chemical cleaning without using any chemical agents and cleaning liquid.
3. Expansibility: changeable focus lens, changing focus depth, wider range of laser cleaning beam.
4. No damage to the base material;
5. Fast and concentrated pulses (1/10000 second) with enormous power (well dozens of of Mio. W) impact and gasification of residues on the surface;
6. Laser pulses are very suitable for the removal of organic matter, such as residues in the tire mold fouling;
Comparison with traditional cleaning methods:
| Comparisons | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning |
| Methods | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning |
| Harm to base material | None | Yes | Yes | None |
| Efficiency | High | Low | Low | Mid. |
| Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice |
| Washing result | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven |
| Precision Washing | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. |
| Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution |
| Operation | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator. Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures required. | Easy to operate, portable or automatic. |
| Investment | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Specifications:
QA-LC200 Laser Cleaning Machine for rust removal.p...
Introduction of Laser Cleaning Technology A.pdf
Model | QA-LC60 | QA-LC100 | QA-LC200 | QA-LC500 |
Laser source | Fiber | Fiber | Fiber | Fiber |
Laser Power | 60W | 100W | 200W | 500W |
Fiber cable L | 3 M | 3 M | 5 M | 20M |
Pulse Energy | 1.5 mJ | 1.5 mJ | 2 mJ | 50 mJ |
Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
Frequency | 1-2000KHz | 1-2000KHz | 1-2000KHz | 10-50KHz |
Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
Cooling | Air cooling | Air cooling | Air cooling | Water cooling |
Dimension | 650*250*560 | 900*450*980 | 900*450*980 | 1100*600*1100 |
Weight | 30Kg | 40Kg | 90Kg | 230Kg |
Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
Optional | Manual | Manual | Manual | Manual |
Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |
Application field:
Components combination, welding surface pretreatment, metal surface
stripping
(all surface paint or designated parts off paint) and a variety of industrial products or molds cleaning
FAQ
1 Q: What is the warranty of this Clean laser rust
removal machine?
A: The warranty is 2 years, but we offer whole life after-sale
service.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service.
4 Q: How is the operation of the machine?
A: We offer operation manual and videos, show you how to operate
the machine.
We can also send engineers to your factory for training.
