|
[China]
Trade Verify
Address: A7-101, Hangyu building, Wuhan University Sci & Tech Park, East Lake High-tech Dev. Zone, Wuhan, Hubei, China
Contact name:Sherry Xiao
Wuhan Questt ASIA Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
60W 100W Portable Laser Rust Removal Machine For Paint Oxide Welding Seam Portable
Description:
QA-LC100 is a 100W portable hand held laser cleaning machine for rust,paint, welding seam removal
Laser cleaning Machine is a new generation of surface cleaning of High-tech products. Easy to install, manipulate and automate. Simple operation, access to power, open equipment, you can carry out chemical reagents, no media, no dust, no water cleaning, automatic focus, laminating surface cleaning (This section of equipment is not suitable for surface cleaning, also can not achieve automatic focus), cleaning the surface of the high degree of cleanliness, can remove the surface of the object resin, oil, stains, dirt, embroidered turbid, coating, coating, paint.
This new design laser rust removal machine has a hand held gun, a manual trigger to start marking,like the gun trigger for shotting.
If you need, you can also fix the gun head up to a working table.
Laser absorption rate for metal:
Based on the metal surface cleaning customized laser, according to the laser absorption rate of different wavelength of materias, the prior art selection of 1064 nm solid-state lasers or fiber lasers, metal absorption rate of up to 30%, with special mode spot, both can effectively clean rusty, and also protect Base metal with no damage. Considering the stability of laser, the use of cost and integration methods and other factors, the latest technology using wavelength of 1064nm fiber laser is better than solid lasers, Maxphotoncis 100W pulse laser cleaning source, is the best configuration for hand-held laser cleaning. |  |
Fiber laser source advantages:
| Laser Source | Advantage | Disadvantage |
| Solid Laser | 1.High power, high pulse energy, high cleaning efficiency 2.Wide range non-metallic material application 3.Excellent cleaning effect, excellent cleaning ability | 1. Large consumption, need high power chiller 2. Limited integration, complicated maintenance 3. Expensive and high cost. |
| Fiber Laser | 1.Free maintenance, high cost effective, low cost. 2.Forced air cooling, high stability of continuous using 3.Good laser beam mode, wide range metal application 4.Without light path problem, Flexibility integration, small and convenient 5.High photoelectric conversion rate, low consumption, energy saving and enviroment protection | 1.Low effective for thick coated metal 2.Power limited |
Product features:
1. fiber laser high power laser cleaning machine
2. Non-contact cleaning, no damage to the parts matrix.
3. accurate cleaning, can achieve precise location, precise size selective cleaning.
4. do not need any chemical cleaning liquid, no consumables, safe and environmental protection.
5. simple operation, power can be hand-held or with the robot to achieve automated cleaning.
6. cleaning efficiency is very high, save time.
7. Laser cleaning system stability, maintenance-free.
Specifications:
Introduction Laser Cleaning Machine Detailed.pdf
QA-LC100 Laser Cleaning Machine for rust removal.p...
Model | QA-LC60 | QA-LC100 | QA-LC200 | QA-LC500 |
Laser source | Fiber | Fiber | Fiber | Fiber |
Laser Power | 60W | 100W | 200W | 500W |
Fiber cable L | 3 M | 3 M | 5 M | 10M |
Pulse Energy | 1.5 mJ | 1.5 mJ | 10 mJ | 50 mJ |
Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
Frequency | 50-500KHz | 50-200KHz | 20-50KHz | 10-50KHz |
Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
Cooling | Air cooling | Air cooling | Water cooling | Water cooling |
Dimension | 450*350*500 | 500*400*550 | 900*600*1100 | 1600*1100*1800 |
Weight | 30Kg | 40Kg | 120Kg | 300Kg |
Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
Optional | Manual | Manual | Manual | Manual |
Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |
Application scope:
Metal workpiece laser derusting, degreasing, laser paint removal, laser removal of zinc and film, laser coating removal, widely used in aerospace, mold, microelectronics, construction, nuclear power plants, automobile manufacturing, medical, military etc
Rust removal: High energy pulsed laser focusing on the surface of object to simulate plasma, continuous irradiation of high-energy plasma instantaneous formation and expansion, resulting in a series of tiny explosions, formating plasma blasting, finally achieve the relativel smooth corrosive layer of boject surface to physical blasting burst, and move through the high speed laser spot to form a plume that will clean the debris to complete the cleaning. Mainly used in metal rust. |
FAQ:
1 Q: What is the warranty of the laser rust removal machine?
A: 2 years` warranty and whole life after-sale service.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer online service for little problems, using online chatting tools like Whatsapp to talk with customers directly for all questions .
4 Q: How is the quality of the machine?
A: Germany high technoloy with good quality.
5 Q: How is the operation of the machine?
A: We can also send engineers to your factory for training. Or you can send worker to gain training in our factory directly.
We offer operation manual and videos, show you how to operate the machine.
Company and Factory:
