Super 50 Watt Old Piping Laser Rust Removal Machine With Gun , Fast
The bonding force between the contaminant and the surface is mainly
covalent bond, double dipole, capillary action, hydrogen bond,
adsorption force and electrostatic force. Among them, capillary
force, adsorption force and electrostatic force (Figure below) are
the most difficult to destroy.
Note: capillary force from a thin liquid layer (such as atmospheric
humidity) in the particle and the surface of the primary layer and
the small gap between the cohesion; adsorption force is the main
adhesion of micron pollutants
Laser absorption rate for metal:
Based on the metal surface cleaning customized laser, according to
the laser absorption rate of different wavelength of materias, the
prior art selection of 1064 nm solid-state lasers or fiber lasers,
metal absorption rate of up to 30%, with special mode spot, both
can effectively clean rusty, and also protect Base metal with no
damage.Considering the stability of laser, the use of cost and integration
methods and other factors, the latest technology using wavelength
of 1064nm fiber laser is better than solid lasers, Maxphotoncis
100W pulse laser cleaning source, is the best configuration for
hand-held laser cleaning.
1. Laser cleaning has no grinding, non-contact, no thermal effect
and suitable for various materials, etc.
2. Rapid, clean and accurate cleaning, removal of surface coatings,
3. No damage to substrate;
4. High cleaning precision, strong controllability
5. Can be used for a long time, low operating costs;
6. The device can realize automatic operation and simple operation;
7. Environmentally friendly, no supplies, no two pollution
QA-LC50G is a 50W hand held type fiber laser rust removal machine.
This is a tigger on gun.
There are 4 wheels on the bottom, so the machine can move freely on
floor, the weight is only 36kgs, you can also take up by hand
easily. Very convenient for transport.
Comparison with Traditional Clean Methods:
|Comparison||Laser Cleaning||Chemical Cleaning||Mechanical Grinding||Dry ice cleaning|
|Method||non-contact cleaning||contact cleaning||Abrasive contact cleaning||non-contact cleaning|
|Consumable||Power||Chemical Detergent||Abrasive paper, grinder||Dry Ice|
|Result||Very good, very clear||Medium, uneven||Medium, uneven||Good, uneven|
|Precision||Accuracy controllable. High precision||Uncontrollable, low precision.||Uncontrollable, medium precision.||Uncontrollable, poor precision.|
|Safety/Environment||No pollution||Chemical pollution||Dust pollution||No pollution|
|Operation||Easy to operate, portable or automation optional.||Complicated process, higher technical requirement of the operator.
Pollution prevention measures required.||Need more time & manpower. Pollution prevention measures
required.||Easy to operate, portable or automatic.|
|Investment||High investment on machine. But no consumable, low maintenance cost||Low investment on machine. But expensive consumables||Medium investment on machine. High man-power cost.||Medium investment on machine. High consumable cost.|
Introduction of Laser Cleaning Technology A.pdf
|Temperature||5-40 ℃||5-40 ℃||5-40 ℃||5-40 ℃|
1 in the solid surface to produce a mechanical resonance
phenomenon, is the surface of the dirt layer or condensation
2 the surface dirt layer is heated and expanded, so as to overcome
the adsorption force of the basic material to the dirt particles
and the surface of the object is separated from the surface of the
3 instant to make the dirt molecules evaporate, gasification or
Industries: air plane and ship metal surface derusting , paint
removal; building surface dirt cleaning; chip surface cleaning of
Machine outlook with sample:
1 Q: What is the warranty ?
A: 2 yearwarranty and whole life after-sale service.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service for little problems, using online chatting tools
like Whatsapp to talk with customers directly for all
4 Q: How is the operation of the machine?
A: We offer operation manual and videos, show you how to operate
We can also send engineers to your factory for training. Or you can
send worker to gain training in our factory directly.