|
[China]
Trade Verify
Address: A7-101, Hangyu building, Wuhan University Sci & Tech Park, East Lake High-tech Dev. Zone, Wuhan, Hubei, China
Contact name:Sherry Xiao
Wuhan Questt ASIA Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Solar Panel inspection machine semi-auto operation high quality
Overview
White Painting Solar Cell Tester With PID Control , 380V Visual Inspection Equipment
The equipment is specially used in the filtration of solar energy mono-crystalline silicon and the poly-crystalline silicon solar panels. Through stimulation of the solar spectrum lamp-house, carries on the testing and surveys to the module related electrical parameter, according to the measurement result.
The equipment is specially used in the filtration of solar energy mono-crystalline silicon and the poly-crystalline silicon cell pieces. Through stimulates the solar spectrum lamp-house, carries on the testing and surveys to the cell module related electrical parameter, according to the measurement result classifies the cell piece.
Features
1. The entire stainless steel chamber avoids welding deformation of the stainless steel and the general steel. The high quality welding of argon reduces vacuum system leaking rate. The use of calibration thermo-couple gauge made no false vacuum reading.
2. The strengthened design and the high smoothness avoid the laminated fragment and shift. Hot working design of the computer auxiliary reduces the temperature unevenness on controlling of the false muti-spots. The close heat conduction coupling avoids temperature fluctuation on the laminated process.
3. Optimized PID control improves the accuracy of temperature control. The fabric strengthened offset plate extends the using time and reduces the working costs. The program-controlled design levels up the flexibility.
Parameters
| Simulation photo source | High efficiency pulses Xeon-lamp (Single pulse energy Y 1200J) |
| Luminous intensity irregularity | 3% |
| Test area | 2?¢2m |
| Test range | 20~240 W 20~300 W |
| Data acquisition speed | 2ms |
| Data acquisition quantity | 8000data point C I V Curve |
| Test Instability | 1% |
| Test load | 10A / 50V |
| Test inaccuracy | 3% |
| Test parameter | Voc Isc Pm Im Vm FF |
| Price |
Application
The entire stainless steel chamber avoids welding deformation of
the stainless steel and the general steel.
The high quality welding of argon reduces vacuum system leaking
rate. Hot working design of the computer auxiliary reduces the
temperature unevenness on controlling of the false muti-spots. The
close heat conduction coupling avoids temperature fluctuation on
the laminated process
Solar Panel:
Higher solar module efficiency lower solar system cost per watt
New Design, 5BB Full Cell, Monocrystallion silicion Higher cells efficiency, better light converting rate
Solar Panel Dimension: 1640*992*35mm, high winds (2400PA) and snow loads (5400PA)
Maximum Power: 335W, voltage at Pmax: 34.00V, current at Pmax: 9.85A
Warranty: 25-year transferable power output warranty
| Parameters of 60Cells Monocrystalline Solar Panels Mono 30V 335W High Efficiency PV Module | |||||
| Module | 315M-60 ~ 335M-60 | ||||
| Encapsulation | Class/Eva/Cell/Eva/Backsheet | ||||
| Maximum Power Pmax(W) | 315 | 320 | 325 | 330 | 335 |
| Maximum Power Voltage(Vmp/V) | 33.20 | 33.40 | 33.60 | 33.80 | 34.00 |
| Maximum Power Current(Imp/A) | 9.49 | 9.58 | 9.67 | 9.76 | 9.85 |
| Open Circuit Voltage(Voc/V) | 40.60 | 41.00 | 41.30 | 41.60 | 41.80 |
| Short Circuit Current(Isc/A) | 10.05 | 10.14 | 10.23 | 10.30 | 10.39 |
| Cell Efficiency(%) | 21.37 | 21.71 | 22.05 | 22.38 | 22.72 |
| Module Efficiency(%) | 19.36 | 19.67 | 19.98 | 20.28 | 20.59 |
| Power Tolerance(W) | 0~+5W | ||||
| Temperature Coefficient of Isc(αIsc) | +0.059%/ºC | ||||
| Temperature Coefficient of Voc(βVoc) | -0.330%/ºC | ||||
| Temperature Coefficient of Pmax(γVoc) | -0.410%/ºC | ||||
| STC | Irradiance 1000w/m2, Cell Temperature 25ºC, Air Mass 1.5 | ||||
